- Recycling Challenges and Opportunities for Biomedical Polyolefins: A
Focus on Sustainability and Indian Regulations
Ashish Raghavan, Smita Mohanty, Sanjay K
Nayak,
Materials Circular Economy.
- Functionalized Nanocrystalline Cellulose Reinforced PLA/PHBH Blend
Films: Assessment of Mechanical, Thermal and Barrier Properties for Sustainable
Packaging Applications
BL Sahoo, S Mohanty, SK Nayak
Journal of Applied Polymer Science
- MnO2-Embedded PVDF-HFP/PEG Composite Membrane: A Multifunctional
Approach for Electrochemical and Biomedical Systems
AK Sahu, D Das, R Pattanayak, KSK Varadwaj, S Mohanty, SK Nayak
ACS Applied Electronic Materials
- Electrospun PVDF/PZT hybrid piezoelectric composites: a route to flexible piezoelectric
nanogenerators
SS Dani, B Sundaray, SK Nayak,
S Mohanty
Smart Materials and Structures
- Development of Sol-gel Derived Bioactive Glass-reinforced PLA/PCL
Filaments for Additive Manufacturing of Bone Tissue Engineering Scaffolds
PA Dash, S Mohanty, SK Nayak,
K Dixit
Journal of Polymers and the Environment
- Natural fiber composites–examining the effect of physical and chemical
pretreatments on the mechanical, thermal and morphological performance
MR Parida, S Mohanty, SK Nayak
Polymer International
- Electrospun Nanofiber Derived From X‐Ray Film Functionalized With ZnO
Nanoparticle and Crystalline Nano Cellulose: Converting Biomedical Waste Into High
Performance Antibacterial Membrane
S Sahoo, S Mohanty, SK Nayak
Journal of Applied Polymer Science
- Biodegradable Coco Peat‐Reinforced PLA/PBS Mulch Films: Enhanced
Moisture Retention and UV‐Induced Degradation for Sustainable Agriculture
AK Gupta, BL Sahoo, M Biswal, S Mohanty, SK
Nayak
Journal of Applied Polymer Science
- Reduced Microplastic Formation and Enhanced Degradation in
Enzyme‐Embedded PLA, PBAT, and Their Blends: Structural, Chemical, and Ecotoxicological
Evaluation
RK Swain, G Prasad, SK Nayak,
S Mohanty, R Dubey
Polymer Engineering & Science
- Compatibilization and Characterization of Recycled Polyolefin Blends
Using α‐Olefin Elastomers for Sustainable High‐Performance Materials
A Raghavan, S Mohanty, SK Nayak
Journal of Applied Polymer Science
- Flame Retardant PP Bio Composites Filled With ATH and Reinforced With Surface Modified Sisal
Fiber (SF): Investigation of the Mechanical, Thermal, Morphological and Flammability
Properties of Thermoplastic Polymer PP/ATH Bio‐Composites
MR Parida, S Mohanty, SK Nayak
Journal of Applied Polymer Science
- Tailoring PEG–MnO₂ content in PVDF-HFP-based proton-conducting composite
polymer electrolyte
AK Sahu, D Das, KSK Varadwaj, S Mohanty, SK
Nayak
Materials Letters
- Evaluation of Functional and Degradation Properties of Enzyme‐Embedded
PLA Films: A Multi‐Analytical Approach and Evaluation of Microplastics
Post‐Degradation
RK Swain, G Prasad, SK Nayak,
S Mohanty.
Journal of Polymer Science
- Development of SPVDF‐HFP/PEG‐MnO2‐based proton‐conducting composite polymer electrolyte
towards proton battery applications
Asish K Sahu, Debidutta Das, Kumar SK Varadwaj, Smita Mohanty, Sanjay K Nayak
Polymer International
- Development of electrospinning-assisted flexible PVDF-Ba (1-x) Sr (x)
TiO3 nanocomposite membrane for piezoelectric energy harvesting application
Sanskruti Smaranika Dani, Bibekananda Sundaray, Sanjay Kumar Nayak, Smita Mohanty
Surfaces and Interfaces
- Sterilization-induced changes in polypropylene waste plastics: implications for sustainable
healthcare recycling
Satyabrata Sahoo, Smita Mohanty, Sanjay K
Nayak.
Journal of Material Cycles and Waste Management
- Synthesis and characterization of ZnO/MgO doped mesoporous bioactive glass: Enhanced
bioactivity and antibacterial properties for bone tissue engineering applications
Pragyan Aparajita Dash, Smita Mohanty, Sanjay Kumar
Nayak
Ceramics International
- Role of microbial enzymes and their modification for plastic biodegradation–a review
Rajendra Kumar Swain, Sanjay Kumar Nayak, Rahul Dubey, Tanushree Bera, Smita Mohanty
Environmental Quality Management
- Polylactic acid (PLA) as a tolerant on the thermomechanical and compostability behaviour of
poly(butylene adipate-co-terephthalate) (PBAT)/thermoplastic starch (TPS) blend
Rahul Dubey, Sanjay Kumar Nayak, Tanusree Bera, Subhashree Panda, Smita Mohanty
Polymer International
- Tailoring the PVDF membrane surface using a new and efficient ternary
nanocomposite: Ag@ TiO2@ MWCNT for water purification application
Jnyana Ranjan Mishra, Smita Mohanty, Rosalin Rath, Sushanta K Samal,
Sanjay K Nayak
Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Biomedical waste plastic: bacteria, disinfection and recycling technologies—a comprehensive
review
S Sahoo, W Rathod, H Vardikar, M Biswal, S Mohanty, SK Nayak
International Journal of Environmental Science and Technology
- Electrospun PVDF and composite nanofiber: Current status and future prescription towards
hybrid Piezoelectric nanogenerators
Sanskruti Smaranika Dani, Bibekananda Sundaray, Sanjay kumar Nayak, Smita Mohanty
Materials Today Communications
- Single-ion conducting polymer electrolyte: A promising electrolyte formulation to extend the
lifespans of LMBs
Asish K Sahu, KSK Varadwaj, Sanjay K Nayak, Smita Mohanty
Nano Energy
- Morphological, Thermal, Physicomechanical and Optical Properties of Crosslinked Poly
(Ester-Urethane-Acrylate): Effect of Added Methyl Methacrylate
Shyam Dev Maurya, Sanjay K Nayak
Sustainable Chemical Engineering
- Advancing sustainable agriculture: Evaluation of Poly (lactic acid)(PLA) based mulch films
and identification of biodegrading microorganisms among soil microbiota
Manmath Parida, Tapaswini Jena, Smita Mohanty, Sanjay K Nayak
International Journal of Biological Macromolecules
- Synergistic effects of nucleating agent, chain extender and nanocrystalline cellulose on PLA
and PHB blend films: Evaluation of morphological, mechanical and functional attributes
Baba Linkanmani Sahoo, Smita Mohanty, Sanjay K
Nayak
Industrial Crops and Products
- Coating for Foul-Release Applications
Smruti R Mohanty, Priyanka Pandey, Smita Mohanty, SK
Nayak
Advancements in Polymer Technology: Select Proceedings of Polymer
Technology Connect 2023
- Characteristic properties of base coat of automobile paint: enhancement in scratch and
abrasion resistance by nanoscale reinforcement—a review
Debasmita Mohanty, MK Kanny, Smita Mohanty, SK
Nayak
Polymer Bulletin
- Facile synthesis methodology and characterization studies of silica‐decorated hybridized
anisotropic nanotubes and nanosheets
Suchhanda S Swain, Lakshmi Unnikrishnan, Smita Mohanty, Sanjay K Nayak
Surface and Interface Analysis
- Study of nonisothermal crystallization kinetics of unstretched and uniaxially stretched
electroactive PVDF composite films
Suvrajyoti Mishra, Smita Mohanty, Sanjay Kumar
Nayak
Macromolecular Chemistry and Physics
- Influence of aluminum trihydrate (ATH) particle size on mechanical, thermal, flame
retardancy and combustion behavior of polypropylene composites
Malaya Ranjan Parida, Smita Mohanty, Manoranjan Biswal, Sanjay K Nayak, Suchita Rai
Journal of Thermal Analysis and Calorimetry
- Development of thermoplastic recycled blends from biomedical waste: evaluation of properties
and value addition thereof
Ashish Raghavan, Smita Mohanty, Manoranjan Biswal, Himalaya S Vardikar,
Wasim Feroze GS, Sanjay K Nayak
Polymer International
- Poly (lactic acid)(PLA)-based mulch films: evaluation of mechanical, thermal, barrier
properties and aerobic biodegradation characteristics in real-time environment
Manmath Parida, Aruni Shajkumar, Smita Mohanty, Manoranjan Biswal,
Sanjay K Nayak
Polymer Bulletin
- Fabrication of highly selective SPVDF-co-HFP/APTES-SiO2/Nafion nanocomposite membranes for
PEM fuel cells
Rosalin Rath, Piyush Kumar, Lakshmi Unnikrishnan, Smita Mohanty, Sanjay K Nayak
Journal of Polymer Research
- Synergistic effect of silica-covered graphene oxide (in-situ) hybrid nanocomposites for use
as a polymer electrolyte membrane for fuel cell applications
Rosalin Rath, Smita Mohanty, Piyush Kumar, Sanjay K
Nayak, Lakshmi Unnikrishnan
Surfaces and Interfaces
- Editorial Expression of Concern: In-situ polymerised PLA-SEP bionanocomposites: effect of
silanol groups on the properties of PLA
P Manju, P Santhana Gopala Krishnan, SK
Nayak
Journal of Polymer Research
- A scientific approach to the occurrence, isolation, and characterization of existing
microplastic pollution in the marine environment—A review
Girija Prasad, Smita Mohanty, Sanjay K
Nayak, Girija K Bharat, Paromita Chakraborty
Water, Air, & Soil Pollution
- In-situ polymerised PLA-SEP bionanocomposites: effect of silanol groups on the properties of
PLA (vol 27, 134, 2020)(Expression of Concern of Vol 27, art no 134, 2020)
P Manju, P Krishnan, Santhana Gopala, SK
Nayak
JOURNAL OF POLYMER RESEARCH
- A review on bioactive glass, its modifications and applications in healthcare sectors
Pragyan Aparajita Dash, Smita Mohanty, Sanjay Kumar
Nayak
Journal of Non-Crystalline Solids
- Modification of nano silica by silane coupling agent and isocyanate to be applicable in
property enhancement of automobile coating
Debasmita Mohanty, Krishnan Kanny, Smita Mohanty, SK
Nayak
AIP Conference Proceedings
- Ecofriendly automobile base coats derived from castor oil: evaluation of nano silica
reinforcements on the performance characteristics of coatings
Debasmita Mohanty, Krishnan Kanny, Smita Mohanty, Sanjay K Nayak
Pigment & Resin Technology
- Development of Polydimethylsiloxane and Polyurethane (PU/PDMS) Based Coating for
Foul-Release Applications
Smruti R Mohanty, Priyanka Pandey, Smita Mohanty, SK
Nayak
Conference on Polymer Technology Connect
- Synergic effect of PVP and PEG hydrophilic additives on porous polyethersulfone (PES)
membranes: preparation, characterization and biocompatibility
VB Athira, Smita Mohanty, Sanjay K. Nayak
J. Polym Res, 2022 (Accepted)
- The influence of hybrid flame retardant and impact modifier on recycled blends formulated
from keyboard waste plastics: A study on its flame retardant, mechanical, thermal, and
chemical properties
Jaidev, K., Manoranjan Biswal, Smita Mohanty, Sanjay
K. Nayak
Polymers for Advanced Technologies 33, no. 2 (2022): 647-657
- Insight into mechanical, thermal, and chemical stability of polysulfone-based membranes for
the separation of O2/N2.
Suchhanda Srabanee Swain, Lakshmi Unnikrishnan, Smita Mohanty, Sanjay K. Nayak
Korean J. Chem. Eng. (2022).
https://doi.org/10.1007/s11814-021-0929-7
- Sulfonated PVDF nanocomposite membranes tailored with graphene oxide nanoparticles: Improved
proton conductivity and membrane selectivity thereof.
Rosalin Rath, Piyush Kumar, Dayasagar Rana, Vighneshwar Mishra, Aswini
Kumar, Smita Mohanty, Sanjay K. Nayak
J Mater Sci 57, 3565–3585 (2022)
- Comprehensive review on various additive manufacturing techniques and its implementation in
electronic devices
Nidhin Divakaran, Jyoti Prakash Das, Ajay Kumar P V, Smita Mohanty,
Ananthakumar Ramadoss, Sanjay K. Nayak
Journal of Manufacturing Systems 62, 477-502, 2022
- Polyolefinic nanocomposite foams: Review of microstructure-property relationships,
applications, and processing considerations
Anish Kumar, Bhaskar Patham, Smita Mohanty, Sanjay
K. Nayak
Volume: 58 issue: 1, page(s): 121-137, 2022
- Development and characterization ofester modified endospermic guar gum/polyvinyl alcohol
(PVA) blown film: Approach towards greener packaging
Pooja Priyadarsini, Manoranjan Biswal, Sumit Gupta, Smita Mohanty,
Sanjay K. Nayak
Industrial Crops and Products, Vol. 187, Part A, 1 November 2022, 115319
(IF:6.449)
- Ecofriendly automobile base coats derived from castor oil: evaluation of nano silica
reinforcements on the performance characteristics of coatings
Debasmita Mohanty, Krishnan Kanny, Smita Mohanty, Sanjay K. Nayak
Pigment & Resin Technology (2022) (Accepted)
- Poly (lactic acid)(PLA)-based mulch films: evaluation of mechanical, thermal, barrier
properties and aerobic biodegradation characteristics in real-time environment
Manmath Parida, Aruni Shajkumar, Smita Mohanty, Manoranjan Biswal,
Sanjay K. Nayak
Polymer Bulletin, 1-26 (2022)
- Waterborne Adhesives
Sukanya Pradhan, Smita Mohanty, Sanjay K.
Nayak
Eco-Friendly Waterborne Polyurethanes: Synthesis, Properties, and
Applications, 231 (2022)
- Design of open-porous three-dimensional starfish-like Co3O4/Ni forest electrode for
efficient energy storage devices
S.Arun Kumar, B. Saravanakumar, Smita Mohanty, Ananthakumar
Ramadoss
Journal of Alloys and Compounds, Vol. 896, 163070 (2022)
- Waterborne Polyurethanes for Biodegradable Coatings
Sukanya Pradhan, Smita Mohanty, Sanjay K.
Nayak
Eco-Friendly Waterborne Polyurethanes, 231-252 (2022)
- PBAT-based blends and composites
Sudheer Kumar, Sukhila Krishnan, Smita Mohanty, Sanjay K. Nayak
Biodegradable Polymers, Blends and Composites, 327-354 (2022)
- Flame retardancy of EPDM/Kevlar fibre composites with zinc borate, magnesium hydroxide and
ammonium polyphosphate
Kesiya George, Smita Mohanty, Manoranjan Biswal, Sanjay K. Nayak
J Therm Anal Calorim (2021).
https://doi.org/10.1007/s10973-021-11148-9
- Thermally conducting hybrid polycarbonate composites with enhanced electromagnetic shielding
efficiency
NSubhransu S. Pradhan, Lakshmi Unnikrishnan, Smita Mohanty, Manoranjan
Biswal, Sanjay K. Nayak
Journal of Polymer Research, volume 28, 463 (2021)
- Recent developments of lignocellulosic natural fiber reinforced hybrid thermosetting
composites for high-end structural applications: A review
A Kumar, M Biswal, S Mohanty, Sanjay K.
Nayak
Journal of Polymer Research 28 (12), 1-37, 2021
- Renewable banana-peel-derived activated carbon as an inexpensive and efficient electrode
material showing fascinating supercapacitive performance
A Tripathy, S Mohanty, A Ramadoss, Sanjay K.
Nayak
Journal of Environmental Chemical Engineering 9 (6), 106398, 2021
- Surface architecture and proton conduction in SPVDF-co-HFP based nanocomposite membrane for
fuel cell applications: influence of aprotic solvent mixture
R Rath, S Mohanty, L Unnikrishnan, Sanjay K.
Nayak
Polymer 234, 124248, 2021
- Role of defective states in MgO nanoparticles on the photophysical properties and
photostability of MEH-PPV/MgO nanocomposite
Ashok Kumar, Sangeetha, Shankar, Jaya Seeli , Periyasamy, Bhuvana K.,
Sanjay K. Nayak
Physical Chemistry Chemical Physics, vol. 23, issue 43, pp. 24944-24944,
2021
- Preparation and characterization of shear thickening fluid coated polypropylene fabric for
soft armour application
S Deepak, D Thirumalaikumarasamy, P Thirumal, T Dharun, KP Bhuvana, Joseph
R Bensingh, K Prakalathan, Sanjay K. Nayak
Journal of the Textile Institute, Volume 112, Issue 10, Pages 1555-1567,
2021
- An effective sustainable approach towards recycling and value addition of waste poly(vinyl
chloride) and acrylonitrile butadiene styrene (ABS) recovered from electronic waste
(e-waste)
Omdeo Kishorrao Gohatre, Manoranjan Biswal, Smita Mohanty, Sanjay K. Nayak
Journal of Polymer Research volume 28, 328 (2021)
- Acrylic‐ester‐polyol based novel two‐component polyurethane clear coat: Evaluation of
performance characteristics
SR Mohanty, S Mohanty, SK Samal, Sanjay K.
Nayak
Journal of Applied Polymer Science 138 (32), 50794, 2021
- Eco-friendly poly (hydroxybutyrate) nanocomposites: preparation and characterization
PJ Jandas, K Prabakaran, R Kumar, S Mohanty, Sanjay
K. Nayak
Journal of Polymer Research 28 (8), 1-9, 2021
- Polyvinylidene fluoride (PVDF)/Ag@ TiO2 nanocomposite membrane with enhanced fouling
resistance and antibacterial performance
JR Mishra, SK Samal, S Mohanty, Sanjay K.
Nayak
Materials Chemistry and Physics 268, 124723, 2021
- Effect of graphite flake and multi‐walled carbon nanotube on thermal, mechanical,
electrical, and electromagnetic interference shielding properties of polycarbonate
nanocomposite
SS Pradhan, L Unnikrishnan, S Mohanty, Sanjay K.
Nayak
Polymer Composites 42 (8), 4043-4055, 2021
- Synthesis of Poly (styrene sulfonyl chloride) via reversible addition-fragmentation chain
transfer polymerization and characterization thereof for membrane applications
RR Choudhury, AK Palai, JM Gohil, S Mohanty, Sanjay
K. Nayak
Journal of the Indian Chemical Society 98 (7), 100087, 2021
- Evaluation of intercalation and interaction in in-situ polymerized PLA-HNT
bionanocomposites
P Manju, PSG Krishnan, Sanjay K. Nayak
Polymers and Polymer Composites 29 (6), 684-695, 2021
- Studies on mechanical, optical and barrier properties of biodegradable PLA-PBAT blend film
with EGMA compatibilizer and micro ZnO
S Anitha, R Kaviya, AS Monisha, NP Vishnu, P Sonal, S Soundararajan,
Sanjay K. Nayak
Journal of Polymer Science and Technology, Volume 6, Issue 2, Pages 1-10,
2021
- Comprehensive Review on Flexoelectric Energy Harvesting Technology: Mechanisms, Device
Configurations, and Potential Applications
A Tripathy, B Saravanakumar, S Mohanty, A Ramadoss, Sanjay K. Nayak
ACS Applied Electronic Materials 3 (7), 2898-2924, 2021
- Synthesis and characterization of polyurethane and its nanocomposite adhesive derived from
biobased isocyanate and polyol
S Sahoo, S Mohanty, Sanjay K. Nayak
Applied Chemical Engineering 4 (1), 33-40, 2021
- 3D Printing of Continuous Natural Fibre Reinforced Biocomposites for Structural
Applications
A Mugeshwaran, N Ranganathan, RJ Bensingh, Sanjay K.
Nayak
Biocomposite Materials, 205-218 (2021)
- Nanomaterial Enhanced Polyelectrolyte Membranes for Hydrogen-Oxygen Fuel Cells
AK Azad, L Unnikrishnan, S Mohanty, Sanjay K.
Nayak
Polymer Korea 45 (1), 101-112 (2021)
- Sustainable Waste Management of Engineering Plastics Generated from E-Waste: A Critical
Evaluation of Mechanical, Thermal and Morphological Properties
K Jaidev, M Biswal, S Mohanty, Sanjay K.
Nayak
Journal of Polymers and the Environment, 1-14 (2021)
- An approach towards the fabrication of energy harvesting device using Ca-doped ZnO/PVDF-TrFE
composite film (vol 205, 122869, 2020)
R Sahoo, S Mishra, A Ramadoss, S Mohanty, S Mahapatra, Sanjay K. Nayak
POLYMER 212 (2021)
- Temperature-dependent dielectric properties of metal-doped ZnO nanofiller reinforced PVDF
nanocomposites (vol 132, 111005, 2020)
R Sahoo, S Mishra, A Ramadoss, S Mohanty, S Mahapatra, Sanjay K. Nayak
MATERIALS RESEARCH BULLETIN 134 (2021)
- A Comparison on Biodegradation Behaviour of Polylactic Acid (PLA) Based Blown Films by
Incorporating Thermoplasticized Starch (TPS) and Poly (Butylene Succinate-co-Adipate) (PBSA)
Biopolymer in Soil
B Palai, S Mohanty, Sanjay K. Nayak
Journal of Polymers and the Environment, 1-17 (2021)
- Electrochemical inspection of polypyrrole/chitosan/zinc oxide hybrid composites
Neethu Antony, Smita Mohanty, Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol. 137 (47), 49561 (2020)
- EDOT Based Terpolymers: Facile Synthesis via Direct C-H Arylation and Barrier Layer in Dye
Sensitized Solar Cells
Pranshula Panigrahi, Manoj K Mallick, Smita Mohanty, Sanjay K. Nayak , Akshaya K Palai
Chemistry Select, Vol 5 (28), 8674-8678, 2020
- Ethylene propylene diene monomer rubber-based heat shielding materials for solid rocket
motor: Impact of Kevlar fiber reinforcement on the thermal and mechanical properties
Kesiya George, Bishnu P Panda, Manoranjan Biswal, Smita Mohanty, Sanjay K. Nayak
Polymers for Advanced Technologies, Vol. 31 (6), 1280-1290, 2020
- 3D Architecture Electrode Materials for Supercapacitors
Ananthakumar Ramadoss, S Arunkumar, Nilimapriyadarsini Swain,
Balasubramanian Saravanakumar, Smita Mohanty, Sanjay K.
Nayak
237th ECS Meeting with the 18th International Meeting on Chemical Sensors
(IMCS 2020)(May 10-14, 2020)
- Three-Dimensional Binder Free Co-MOF@Co3O4/Ni Nanostructured Electrode for High Performance
Supercapatteries
Ankita Mohanty, Smita Mohanty, Sanjay K. Nayak
, Ananthakumar Ramadoss
237th ECS Meeting with the 18th International Meeting on Chemical Sensors
(IMCS 2020)(May 10-14, 2020)
- One-pot electrodeposition of polyaniline/SWCNT/ZnO film and its positive influence on
photovoltaic performance as counter electrode material.
M Bumika, Manoj Kumar Mallick, S Mohanty, Sanjay K.
Nayak Akshaya K Palai
Materials Letters, Vol. 279 (2020), 128473 (2020)
- Temperature-dependent dielectric properties of metal-doped ZnO nanofiller reinforced PVDF
nanocomposites
R Sahoo, S Mishra, A Ramadoss, S Mohanty, S Mahapatra, Sanjay K. Nayak
Materials Research Bulletin, Vol. 132, 111005 (2020)
- Preparation and characterization of porous polyethersulfone (PES) membranes with improved
biocompatibility by blending sulfonated polyethersulfone (SPES) and cellulose acetate (CA)
– A comparative study
VB Athira, Smita Mohanty, Sanjay K. Nayak
Materials Today Communications, Volume 25, December 2020, 101544
- Interfacial chemistry and electronic structure of epitaxial lattice-matched
TiN/Al0.72Sc0.28N metal/semiconductor superlattices determined with soft x-ray
scattering
Bidesh Biswas, Sanjay K. Nayak Vijay Bhatia, Ashalatha Indiradevi Kamalasanan Pillai, Magnus Garbrecht,
Mohammed H Modi, Mukul Gupta, Bivas Saha
Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and
Films, Volume 38, Issue 5
- Nanocomposites of epoxidized soybean oil (ESO)-based epoxy (DGEBA) blends and clay
platelets: cured with methylhexahydrophthalic anhydride crosslinker
Sudheer Kumar, Smita Mohanty, Sanjay K.
Nayak
Journal of Macromolecular Science, Part A Pure and Applied Chemistry
Volume 57 (9), 2020, IF: 2.50
- In-situ polymerised PLA-SEP bionanocomposites: effect of silanol groups on the properties of
PLA
P Manju, P Krishnan, Sanjay K. Nayak
Journal of Polymer Research 27 (5), 2020, IF: 2.50
- Enhanced dielectric and piezoelectric properties of Fe-doped ZnO/PVDF-TrFE composite
films
Rajesh Sahoo, Suvrajyoti Mishra, Lakshmi Unnikrishnan, Smita Mohanty,
Swapna Mahapatra, Sanjay K. Nayak Shahid
Anwar, Ananthakumar Ramadoss
Materials Science in Semiconductor Processing, October 2020, IF: 2.722
- Nanocomposites of epoxidized soybean oil (ESO)-based epoxy (DGEBA) blends and clay
platelets: cured with methylhexahydrophthalic anhydride crosslinker
Sudheer Kumar, Smita Mohanty and Sanjay K.
Nayak
Journal of Macromolecular Science, Part A: Pure and Applied Chemistry,
Online 2020, IF: 1.163
- In-situ polymerised PLA-SEP bionanocomposites: Effect of silanol groups on the properties of
PLA
Manju Puthumana, Palaniandavar, Santhana Gopala Krishnan and Sanjay K. Nayak
Journal of Polymer Research, Online 2020,
IF: 1.53
- Evaluation of intercalation and interaction in in-situ polymerized PLA-HNT
bionanocomposites
Manju Puthumana, Palaniandavar, Santhana Gopala Krishnan and Sanjay K. Nayak
Polymer and Polymer Composites, Accepted
Manuscript, 2020, 0.683
- Investigation of the electroactive phase content and dielectric behaviour of mechanically
stretched PVDF-GO and PVDF-rGO composites
Suvrajyoti Mishra, Rajesh Sahoo, Lakshmi Unnikrishnan, Ananthakumar
Ramadoss, Smita Mohanty, and Sanjay K. Nayak
Materials Research Bulletin, Volume 124, April
2020, IF: 3.355
- Epoxidized soybean oil toughened recycled blends: a new method for the toughening of
recycled polymers employing renewable resources
Sunil S. Suresh, Smita Mohanty and Sanjay K.
Nayak
Polymer Bulletin, Online 2020, 1-20, IF: 1.858
- Thermally Conducting Polymer Composites with EMI Shielding: A review
Subhransu S. Pradhan, Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K. Nayak
Journal of Electronic Materials, Online 2020,
1-16, IF: 1.676
- Development of recycled blends based on cables and wires with plastic cabinets: An effective
solution for value addition of hazardous waste plastics
K Jaidev, Sunil S Suresh, Omdeo K Gohatre, Manoranjan Biswal, Smita
Mohanty and Sanjay K. Nayak
Waste Management & Research, Online 2020,
1-10, IF: 1.114
- Influence of printing parameters on structures, mechanical properties and surface
characterization of aluminium alloy manufactured using selective laser melting
Rajkumar Subbiah, Joseph Bensingh, Abdul Kader and Sanjay K. Nayak
The International Journal of Advanced Manufacturing Technology,
Online 2020, IF: 2.601
- Fabrication of cellulose acetate-chitosan based flexible 3D scaffold-like porous membrane
for supercapacitor applications with PVA gel electrolyte
L. R. Aswathy, Akshaya Kumar Palai, Ananthakumar Ramadoss, S. Mohanty and
Sanjay K. Nayak
Cellulose, Online 2020, IF:
3.917
- Study on thermal, mechanical and morphological properties of recycled poly(vinyl chloride)
(r-PVC)/fly ash composites
Omdeo Kishorrao Gohatre, Manoranjan Biswal, Smita Mohanty and Sanjay K. Nayak
Polymer International, Online 2020, IF: 2.433
- Effect of silicon carbide on the mechanical and thermal properties of ethylene propylene
diene monomer‐based carbon fiber composite material for heat shield application
Subham Kumar, Bishnu P. Panda, Smita Mohanty and Sanjay K. Nayak
Journal of Applied Polymer Science, Online
2020, IF: 2.188
- Ethylene propylene diene monomer rubber‐based heat shielding materials for solid rocket
motor: Impact of Kevlar fiber reinforcement on the thermal and mechanical properties
Kesiya George, Bishnu P Panda, Manoranjan Biswal, Smita Mohanty and
Sanjay K. Nayak
Polymers for Advanced Tecnologies, Online
2020, IF: 2.162
- Construction of Three-Dimensional MnO2/Ni Network as an Efficient Electrode Material for
High Performance Supercapacitors
Nilimapriyadarsini Swain, Arjit Mitra, Balasubramaniam Saravanakumar,
Suresh Kannan Balasingam, Smita Mohanty, Sanjay K. Nayak and Ananthakumar Ramadoss
Electrochimica Acta, Online 2020, IF: 5.383
- A review on epoxy-based electrically conductive adhesives
Ruchi Aradhana, Smita Mohanty and Sanjay K.
Nayak
International Journal of Adhesion and Adhesives, Volume 99, 2020, IF: 2.501
- Thermal, Electrical and Mechanical Properties of Expanded Graphite and Micro-SiC Filled
Hybrid Epoxy Composite for Electronic Packaging Applications
S Mohanty and Sanjay K. Nayak
Journal of Electronic Materials 49 (1),
212-225, 2020
- Infuence of cellulose nanocrystal/sisal fiber on the mechanical, thermal, and morphological
performance of polypropylene hybrid composites
Jyoti Agarwal, Smita Mohanty and Sanjay K.
Nayak
Polymer Bulletin, Online 2020, IF: 1.858
- Valorization of Pineapple peel waste and Sisal fibre: Study of Cellulose nanocrystals on
Polypropylene nanocomposites
Jyoti Agarwal, Smita Mohanty and Sanjay K.
Nayak
Journal of Applied Polymer Science, Accepted
Manuscript, 2020
- Liver Tissue Regeneration using nano silver impregnated Sodium Alginate / PVA composite
Nanofibres
Manikandan G, Yuvashree M, Sangeetha A, Bhuvana K P and Sanjay K. Nayak
SciMedicine Journal, Vol. 2 (2020) Pg. 16 – 21
- Preparation and bioactivity studies of electrospun 3D bone scaffolds
R. Rohith Kumar, A Sangeetha, K.P. Bhuvana, R. Joseph Bensingh and
Sanjay K. Nayak
Journal of Materials Science, Accepted
Manuscript, 2020
- Design, synthesis and characterization of higher poly(alkyl lactate acrylate)s
Manju Puthumana, Palaniandavar Santhana Gopala Krishnan and Sanjay K. Nayak
International Journal of Polymer Analysis and Characterization,
2020, IF: 1.426
- Novel electrically conductive epoxy/reduced graphite oxide/silica hollow microspheres
adhesives with enhanced lap shear strength and thermal conductivity
Aradhana, R., Mohanty, S., and Sanjay K.
Nayak
Composites Science and Technology, Vol. 169,
86-94 (2019), IF: 5.160
- Synthesis and characterization of novel functional poly (vinyl alcohol-co-styrene sulfonic
acid) copolymers
Choudhury, R. R., Gohil, J. M., Mohanty, S., and Sanjay K. Nayak
International Journal of Polymer Analysis and Characterization,
1-12 (2019), IF: 0.15
- Advances in Piezoelectric Polymer Composites for Energy Harvesting Applications: A
Systematic Review.
Mishra, S., Unnikrishnan, L., Sanjay K.
Nayak and Mohanty, S.
Macromolecular Materials and Engineering, Vol.
304(1), 1800463 (2019), IF: 2.69
- Synergistic effect of polypyrrole and reduced graphene oxide on mechanical, electrical and
thermal properties of epoxy adhesives
Aradhana, R., Mohanty, S., and Sanjay K.
Nayak
Polymer, 166, 215-228 (2019), IF: 3.483
- High performance electrically conductive epoxy/reduced graphene oxide adhesives for
electronics packaging applications
Aradhana, R., Mohanty, S., and Sanjay K.
Nayak
Journal of Materials Science: Materials in Electronics, Vol. 30(4), 4296-4309 (2019), IF: 2.324
- Effect of temperature on thermal, mechanical and morphological properties of polypropylene
foams prepared by single step and two step batch foaming process
Kumar, A., Patham, B., Mohanty, S., and Sanjay K.
Nayak
Journal of Polymer Research, Vol. 26(3),
(2019), IF: 1.434
- Review on adhesive joints and their application in hybrid composite structures
Jeevi, G., Sanjay K. Nayak,
and Abdul Kader, M.
Journal of Adhesion Science and Technology, Vol. 33 (14), 1497-1520 (2019), IF: 1.039
- Mechanical properties and thermal conductivity of epoxy composites enhanced by h-BN/RGO and
mh-BN/GO hybrid filler for microelectronics packaging application
Nayak, S. K., Mohanty, S., and Sanjay K.
Nayak
SN Applied Sciences, Vol. 1(4), (2019), IF: 1.689
- Epoxy-based composite adhesives: Effect of hybrid fillers on thermal conductivity, rheology,
and lap shear strength
Kumar, R., Mishra, A., Sahoo, S., Panda, B. P., Mohanty, S., and Sanjay K. Nayak
Polymers for Advanced Technologies, Vol. 30
(6), (2019), 1365-1374, IF: 2.137
- Study on epoxy resin-based thermal adhesive filled with hybrid expanded graphite and
graphene nanoplatelet
Kumar, R., Mohanty, S. and Sanjay K. Nayak
SN Applied Sciences, Vol. 1 (180) (2019),
IF: 1.689
- Environmentally Benign Fouling-Resistant Marine Coatings: A Review.
Pradhan S, Kumar S, Mohanty S, and Sanjay K.
Nayak
Polymer-Plastics Technology and Materials, Vol. 58(5), 498-518 (2019), IF: 1.655
- Device engineering aspects of Organic Light-Emitting Diodes (OLEDs)
Ashok Kumar, S., Shankar, J. S., K Periyasamy, B., and Sanjay K. Nayak
Polymer-Plastics Technology and Materials, Vol. 58 (15), 1597-1624 (2019), IF: 1.655
- Studies on Optical Characteristics of Multicolor Emitting MEH-PPV/ZnO Hybrid
Nanocomposite
Shankar, Jaya Seeli, Sangeetha Ashok Kumar, Bhuvana K. Periyasamy and
Sanjay K. Nayak
Polymer-Plastics Technology and Materials, Vol. 58 (2) 148-157 (2019), IF: 1.655
- Correlation between Calcination Temperature and Optical Parameter of Zinc Oxide (ZnO)
nanoparticles
Sangeetha A, Jayaseeli S, Bhuvana K P, M. Abdul Kader and Sanjay K. Nayak
Journal of Sol Gel Science & Technology, Vol. 91 (2), 261–272, (2019), IF: 1.745
- Progress of novel techniques for lightweight automobile applications through innovative
eco-friendly composite materials: A review
J Agarwal, S Sahoo, S Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, (2019), IF: 0.912
- Hydrothermally synthesized self-assembled multi-dimensional TiO2/Graphene oxide composites
with efficient charge transfer kinetics fabricated as novel photoanode for dye for dye
sensitized solar cell
VS Manikandan, AK Palai, S Mohanty and Sanjay K.
Nayak
Journal of Alloys and Compounds, Vol. 793,
400-409 (2019), IF: 3.779
- Synthesis and characterization of polyurethane and its nanocomposite adhesive derived from
biobased isocyanate and polyol
S Sahoo, S Mohanty and Sanjay K. Nayak
Applied Chemical Engineering, Vol. 2 (3), 1-8,
(2019)
- Evaluation of biodegradability of disposable product prepared from poly (lactic acid) under
accelerated conditions
PJ Jandas, K Prabakaran, S Mohanty and Sanjay K.
Nayak
Polymer Degradation and Stability, Vol. 164,
46-54 (2019), IF: 3.193
- Influence of non-metallic parts of waste printed circuit boards on the properties of
plasticised polyvinyl chloride recycled from the waste wire
RK Das, OK Gohatre, M Biswal, S Mohanty and Sanjay
K. Nayak
Waste Management & Research, Vol. 7 (6),
569-577, (2019), IF: 2.015
- Fe2O3 as an efficient filler in PVDF-HFP based polymeric electrolyte
for dye sensitized solar cell application
S Kumar, VS Manikandan, AK Palai, S Mohanty and Sanjay K. Nayak
Solid State Ionics, Vol. 332, 10-15 (2019),
IF: 2.751
- A review on protective polymeric coatings for marine applications
S Verma, S Mohanty and Sanjay K. Nayak
Journal of Coatings Technology and Research Vol. 16 (2), 307-338 (2019), IF: 1.619
- The imperative role of polymers in enzymatic cholesterol biosensors-an overview
N Antony, L Unnikrishnan, S Mohanty and Sanjay K.
Nayak
Polymer-Plastics Technology and Materials, Vol. 58 (16), 1713-1741, (2019), IF: 1.655
- Effect of nitrile rubber on mechanical, thermal, rheological and flammability properties of
recycled blend
SS Suresh, S Mohanty and Sanjay K. Nayak
Process Safety and Environmental Protection, Vol. 123, 370-378 (2019), IF: 3.441
- Synergistic effect of alkyl lactate functional groups on properties of methacrylate
polymers
M Purushothaman, PSG Krishnan and Sanjay K.
Nayak
Iranian Polymer Journal, Vol. 28 (5),
435–444 (2019), IF: 1.278
- Synthesis and characterization of surface-functionalized mesoporous graphene
nanohybrid
SS Swain, L Unnikrishnan, S Mohanty and Sanjay K.
Nayak
Applied Nanoscience, Vol. 9 (7),
1531–1552 (2019), IF: 2.951
- Preparation and characterization of poly (lactic acid)/poly (ethylene oxide) blend film:
effects of poly (ethylene oxide) and poly (ethylene glycol) on the properties
D Saha, SK Samal, M Biswal, S Mohanty and Sanjay K.
Nayak
Polymer International, Vol. 68 (1), 164-172
(2019), IF: 2.352
- Development of multifunctional polymethylsiloxane (PDMS) based-Epoxy-Zinc Oxide
nanocomposite coatings for marine applications
S. Verma, S. Das, S Mohanty and Sanjay K.
Nayak
Polymers for Advanced Technologies, Vol. 30
(9), 2881-2894 (2019), IF: 2.162
- Curing kinetics of bio-based epoxy resin-toughened DGEBA epoxy resin blend
S. Kumar, S. K. Samal, S. Mohanty and Sanjay K.
Nayak
Journal of Thermal Analysis and Calorimetry, Vol. 137(5), 1567-1578 (2019), IF: 2.471
- Composition and Recyclability Analysis of Poly (Vinyl Chloride) Recovered from Computer
Power Cables and Commercial Wires.
O. K. Gohatre, K. Jaidev, S. S. Suresh, M. Biswal, S, Mohanty and
Sanjay K. Nayak
Journal of Vinyl and Additive Technology, (2019), IF: 1.292
- A facile preparation of epoxy-polydimethylsiloxane (EP-PDMS) polymer coatings for marine
applications.
S. Verma, S. Das, S. Mohanty and Sanjay K.
Nayak
Journal of Materials Research, Vol. 34(16),
2881-2894 (2019), IF: 1.982
- Isolation and characterisation of nanofibrillated cellulose from waste cotton: effects on
thermo-mechanical properties of polylactic acid/MA-g-SEBS blends.
V. H. Sangeetha, T. O. Varghese and Sanjay K.
Nayak
Iranian Polymer Journal, Vol. 28(8), 673-683
(2019), IF: 1.707
- Gas permeation and selectivity characteristics of PSF based nanocomposite membranes
SS Swain, L Unnikrishnan, S Mohanty and Sanjay K.
Nayak
Polymer, Vol. 180, 121692, (2019), IF: 3.771
- In situ reactive compatibilization of polylactic acid (PLA) and thermoplastic starch (TPS)
blends; synthesis and evaluation of extrusion blown films thereof
Bishwabhusana Palai, Manoranjan Biswal, Smita Mohanty and Sanjay K. Nayak
Industrial Crops and Products, Vol. 141,
1117481 (2019), IF: 4.191
- Synergistic effect of polylactic acid(PLA) and Poly(butylene succinate-co-adipate) (PBSA)
based sustainable, reactive, super toughened eco-composite blown films for flexible
packaging applications
Bishwabhusana Palai, Manoranjan Biswal, Smita Mohanty and Sanjay K. Nayak
Polymer Testing, Online (2019), IF: 2.943
- Studies On Mechanical, Optical And Barrier Properties Of Low Density Poly Ethylene With
Micro Clay
S Soundararajan, Gokulanandhan V, Kalaivanan M, Sunderasan L, Veeramani T.
and Sanjay K. Nayak
Journal of Polymer & Composites, Vol. 7
(2), (2019), IF: 0.10
- Synergistic influence of anisotropic 3D carbon nanotube-graphene hybrid mixed matrix
membranes on stability and gas permeation characteristics
Suchhanda S.Swain, Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K. Nayak
Journal of the Taiwan Institute of Chemical Engineers, Vol. 105, 150-165 (2019), IF: 3.834
- Fundamental and innovative approaches for filler design of thermal interface materials based
on epoxy resin for high power density electronics application: a retrospective
Sagar Kumar Nayak, Smita Mohanty and Sanjay K.
Nayak
Multiscale and Multidisciplinary Modeling, Experiments and Design,
Online (2019)
- Silver (Ag) nanoparticle-decorated expanded graphite (EG) epoxy composite: evaluating
thermal and electrical properties
Sagar Kumar Nayak, Smita Mohanty and Sanjay K.
Nayak
Journal of Materials Science: Materials in Electronics, Online (2019), IF: 2.195
- Influence of surface roughness on tribological and mechanical properties of micromilled and
laser ablated poly (methyl methacrylate) PMMA organic glass
Nalini Ranganathan, S. Rajkumar, R. Joseph Bensingh, F. Anto Lawrence, M.
Abdul Kader and Sanjay K. Nayak
Polymer Testing, Online (2019), IF: 2.943
- Decomposed Copper(II) Acetate Over Expanded Graphite (EG) as Hybrid Filler to Fabricate
Epoxy Based Thermal Interface Materials (TIMs)
Sagar Kumar Nayak, Smita Mohanty, and Sanjay K.
Nayak
Journal of Electronic Materials, Online
(2019), IF: 1.676
- Simulation-Based Approach for Probing Rheology-Processing-Structure Relationships in Foam
Blow Molding
A. Kumar, B. Patham, S. Mohanty, and S. K.
Nayak
International Polymer Processing, Vol. 34 (5),
513-531 (2019), IF: 0.535
- A new way synthesis of expanded graphite as a thermal filler to enhance the thermal
conductivity of DGEBA resin as thermal interface material
Sagar Kumar Nayak, Smita Mohanty and Sanjay K.
Nayak
High Performance Polymers, Online (2019),
IF: 1.090
- A review on fatigue damages in the wind turbines: Challenges in determining and reducing
fatigue failures in wind turbine blades
Karthikeyan Ravikumar, Rajkumar Subbiah, Nalini Ranganathan, Joseph
Bensingh, Abdul Kader and Sanjay K. Nayak
Wind Engineering, Online (2019), IF: 0.79
- Finite element analysis of elastomer used in automotive suspension systems
R Karthikeyan, S Rajkumar, R Joseph Bensingh, M Abdul Kader and Sanjay K. Nayak
Journal of Elastomers and Plastics, Online
(2019), IF: 1.112
- Morphological evaluation of ultra low-density poly (methyl methacrylate) microcellular
plastic developed through cyclic foaming technique
G Radhakrishna, R Dugad, A Gandhi, S Mohanty and Sanjay K. Nayak
International Journal of Materials Engineering Innovation, Vol. 10 (4), (2019)
- An overview on the recent developments in polyaniline-based supercapacitors
Joyita Banerjee, Kingshuk Dutta, M. Abdul Kader and Sanjay K. Nayak
Polymers for Advanced Technologies. Vol. 30
(8), 1902-1921, (2019)IF: 2.137
- Freestanding electrically conducting flexible membranes based on novel chitosan/PANI/rGO
nanocomposites
Aswathy N.R., Akshaya K.Palai, S.Mohanty and Sanjay
K. Nayak
Materials Letters, Vol.(126777) (2020), IF: 3.0
- Recent Advancement in plant-oil derived polyol based polyurethane foam for future
perspective: A review
Indrajeet Singh, Sushanta K. Samal, Smita Mohanty and Sanjay K. Nayak
European Journal of Lipid Science and Technology, Online (2019), IF: 1.852
- Preparation of Hydrophobic Epoxy Polydimethylsiloxane Graphene oxide Nanocomposite Coatings
for Antifouling Application
Shatakshi Verma, Smita Mohanty and Sanjay K.
Nayak
Soft Matter, 2020,16, 1211-1226, IF: 3.399
- Polypropylene - Nano-silica Nanocomposite Foams: Mechanisms underlying Foamability, and Foam
Microstructure, Crystallinity and Mechanical Properties
Anish Kumar, Bhaskar Patham, Smita Mohanty and Sanjay K. Nayak
Polymer International, Online (2019), IF: 2.433
- Effect of recycled poly(vinyl chloride) on the mechanical, thermal and rheological
characteristics of recycled poly(methyl methacrylate)
Sunil S. Suresh, Smita Mohanty and Sanjay K.
Nayak
Journal of Material Cycles and Waste Management, Online 2019, IF: 2.004
- Depressurization induced morphology control in solid-state microcellular batch foaming
process
I Singh, A Gandhi, S Mohanty and Sanjay K.
Nayak
Journal of Macromolecular Science, Part A, 57,
409-420, (2019)
- Recent advances, unsolved deficiencies, and future perspectives of hydrogen fuel cells in
transportation and portable sectors
Rosalin Rath, Piyush Kumar, Smita Mohanty and Sanjay
K. Nayak
International Journal of Energy Research, 43,
15, 8931-8955, 2019
- Current Scenario of Poly (2,5-Benzimidazole) (ABPBI) as Prospective PEM for Application in
HT-PEMFC
Rosalin Rath, Piyush Kumar, Lakshmi Unnikrishnan, Smita Mohanty and
Sanjay K. Nayak
Polymer reviews, 2019, IF:
6.766
- Thermal conductive epoxy adhesive composites filled with carbon-based particulate fillers: a
comparative study
Rajesh Kumar, Smita Mohanty and Sanjay K.
Nayak
Journal of Adhesion Science and Technology, Volume 34,8, 807-827, 2019
- A review on inkjet printing of nanoparticle ink for flexible electronics
Laxmidhar Nayak, Smita Mohanty, Sanjay K. Nayak
Ananthakumar Ramadoss
Journal of Materials Chemistry C, 7,
8771-8795, 2019
- Study on Epoxy Resin based Thermal Adhesive Composite incorporated with Expanded
Graphite/Silver Flake Hybrids
Rajesh Kumar, Smita Mohanty and Sanjay K.
Nayak
Materials Communication, Volume 20, September
2019, 100561
- Benchmarking the complex geometric profiles, dimensional accuracy and surface analysis of
printed parts
Subbaian Kaliamoorthy, P., Subbiah, R., Bensingh, J., Kader, A. and
Sanjay K. Nayak
Rapid Prototyping Journal, Vol. 26 No. 2, pp.
319-329, 2019
- Hybrid composites for automotive applications – A review
B Ravishankar, Sanjay K. Nayak M Abdul Kader
Journal of Reinforced Plastics and Composites, Vol. 38 (18), 2019, IF: 1.786
- Synthesis and characterization of itaconic-based epoxy resins
Sudheer Kumar, Sushanta K. Samal, Smita Mohanty and Sanjay K. Nayak
Polymers for Advanced Technologies, Vol., 29
(1), 160-170 (2018), IF: 1.907
- In-Situ Aerobic Biodegradation Study of Epoxy-Acrylate Film in Compost Soil
Environment
Sukanya Pradhan, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Journal of Polymers and the Environment, Vol.
26 (3), 1133-1144 (2018), IF: 1.877
- A Review on Acrylate Terminated Urethane Oligomers and Polymers: Synthesis and
Applications
SD Maurya, SK Kurmvanshi, S Mohanty and Sanjay K.
Nayak
Polymer-Plastics Technology and Engineering, 57 (7), 625-656 (2018), IF: 1.232
- Investigation on the influence of EVA content on the mechanical and thermal characteristics
of Poly (lactic acid) Blends.
V.H. Sangeetha, RB Valapa, T.O. Varghese and Sanjay
K. Nayak
Journal of Polymers and Environment, Vol. 26
(1), 1-14, (2018), IF: 1.492
- Mechanical, dynamic mechanical, and interfacial properties of sisal fiber-reinforced
composite with epoxidized soybean oil-based epoxy matrix
Sushanta K. Sahoo, Smita Mohanty and Sanjay K.
Nayak
Polymer Composites, 39 (6), 2065-2072, (2018),
IF: 2.324
- Soy-bean oil based polyurethane – polyacrylonitrile interpenetrating polymer networks
as transparent coating materials
Subhajit Das, Hemjyoti Kalita, Smita Mohanty and Sanjay K. Nayak
Advances in Polymer Technology, 37(4),
1050-1060 (2018), IF: 1.291
- State of the art and future prospectives of poly (lactic acid) based blends and
composites.
Sangeetha, V.H., Deka, H., Varghese, T.O. and Sanjay
K. Nayak
Polymer Composites, 39 (1), 81-101 (2018),IF: 2.324
- Recent development of bio-based epoxy resins: A review
Sudheer Kumar, Sushanta K Samal, Smita Mohanty and Sanjay K. Nayak
Polymer Plastics Technology & Engineering, 57 (3), 133-155 (2018), IF: 1.232
- A review on waterborne thermosetting polyurethane coatings based on castor oil: Synthesis,
characterization and coating application
S.S. Panda, B P Panda, Smita Mohanty and Sanjay K.
Nayak
Polymer Plastics Technology & Engineering, Vol. 57 (6), 500-522 (2018), IF: 1.232
- Effect of silicone rubber based impact modifier on mechanical and flammability properties of
plastics recovered from waste mobile phones
Parameswaran Sarath, Manoranjan Biswal, Smita Mohanty and Sanjay K. Nayak
Journal of Cleaner Production, Vol. 171,
209-219 (2018), IF: 5.71
- Sustainable production of polyurethane from castor oil, functionalized with epoxy- and
hydroxyl-terminated poly(dimethyl siloxane) for biomedical applications
Aiswarea Mathew, Surendra Kurmvanshi, Smita Mohanty and Sanjay K. Nayak
J Mater Sci., Vol. 53 (5), 3119-3130 (2018),
IF: 2.599
- Comparison of mechanical, electrical and thermal properties in graphene oxide and reduced
graphene oxide filled epoxy nanocomposite adhesives
R Aradhana, S Mohanty and Sanjay K. Nayak
Polymer, Vol. 141, 109-123 (2018), IF: 3.68
- Kinetics of the esterification between 2-[(4- hydroxybutoxy) carbonyl] benzoic acid with
1,4-Butanediol: Tetrabutyl orthotitanate as catalyst
Shyam Dev Maurya, Sonalee Das, Smita Mohanty and Sanjay K. Nayak
Material Focus, Vol. 7(2), 166-171, (2018).
- Degradation Study of Biobased Polyester–Polyurethane and its Nanocomposite Under
Natural Soil Burial, UV Radiation and Hydrolytic-Salt Water Circumstances
S Sahoo, H Kalita, S Mohanty and Sanjay K.
Nayak
Journal of Polymers and the Environment, Vol.
26 (4), 1528-1539 (2018), IF: 1.877
- A Review on Computer Waste with its Special Insight to Toxic Elements, Segregation and
Recycling Techniques
SS Suresh, S Bonda, S Mohanty and Sanjay K.
Nayak
Process Safety and Environmental Protection, Vol. 116, 477-493 (2018), IF: 2.905
- A Review on Superhydrophobic Polymer Nanocoatings: Recent Development and Applications
S Das, S Kumar, SK Samal, S Mohanty and Sanjay K.
Nayak
Industrial & Engineering Chemistry Research, Vol. 57 (8), 2727-2745 (2018), IF: 2.483
- Toughening of Petroleum Based (DGEBA) Epoxy Resins with Various Renewable Resources Based
Flexible Chains for High Performance Applications: A Review
S Kumar, S Krishnan, SK Samal, S Mohanty and Sanjay
K. Nayak
Industrial & Engineering Chemistry Research, 57(8), 2711-2726 (2018), IF: 2.483
- Effect of Nano Sepiolite Fiber on the Properties of Poly (ethyl lactate acrylate):
Hydrophilicity and Thermal Stability
M Purushothaman, PSG Krishnan and Sanjay K.
Nayak
Materials Focus, Vol. 7 (1), 101-107 (2018)
- Facile synthesis of bio-sourced polyurethane-fluorosilane modified TiO2 hybrid coatings for
high-performance self cleaning application
SA Yesudass, S Mohanty and Sanjay K. Nayak
Journal of Polymer Research, Vol. 25 (2),
(2018), IF: 1.615
- Shear Strength and Morphological Study of Polyurethane-OMMT Clay Nanocomposite Adhesive
Derived from Vegetable Oil-Based Constituents
S Sahoo, H Kalita, S Mohanty and Sanjay K.
Nayak
Journal of Renewable Materials, Vol. 6 (1),
117-125, (2018), IF: 1.12
- Polymer Light Emitting Diodes: Materials, Technology and Device
KP Bhuvana, RJ Bensingh, MA Kader and Sanjay K.
Nayak
Polymer-Plastics Technology and Engineering, Vol. 57 (17), 1784-1800, (2018), IF: 1.232
- Biobased polyurethane adhesive over petroleum based adhesive: Use of renewable
resource
S Sahoo, S Mohanty and Sanjay K. Nayak
Journal of Macromolecular Science, Part A, Vol. 55 (1), 36-48 (2018), IF: 0.963
- Volume shrinkage and abrasive wear properties of crosslinked Poly
(ester-urethane-acrylate)/MMA copolymer: Effect of chain length
SD Maurya, SK Kurmvanshi, S Mohanty and Sanjay K.
Nayak
Journal of Macromolecular Science, Part A, Vol. 55 (1), 1-10 (2018), IF: 0.963
- Synthesis and application of functionalised acrylonitrile-butadiene rubber for enhancing
recyclability of poly (vinylchloride)(PVC) and poly (methylmethacrylate)(PMMA)
SS Suresh, S Mohanty and Sanjay K. Nayak
Clean Technologies and Environmental Policy, Vol. 20 (5), 969–979 (2018), IF: 3.331
- Synthesis and Characterization of Green Polyurethane/Nanosilica Composite: Study of
Thermomechanical, Surface Topography and Physicochemical Properties
Sonalee Das, Smita Mohanty, and Sanjay K.
Nayak
Material Focus, Vol. 7 (2), 172–181
(2018)
- An eco-friendly approach for toughening of polylactic acid from itaconic acid based
elastomer
S Krishnan, S Mohanty and Sanjay K. Nayak
Journal of Polymer Research 25 (1), 10 (2018),
IF: 1.615
- Antifouling, fouling release and antimicrobial materials for surface modification of reverse
osmosis and nanofiltration membranes
RR Choudhury, JM Gohil, S Mohanty and Sanjay K.
Nayak
Journal of Materials Chemistry A, Vol. 6 (2),
313-333 (2018), IF: 8.867
- Influence of acrylonitrile butadiene rubber on recyclability of blends prepared from
poly(vinyl chloride) and poly(methyl methacrylate)
Sunil S Suresh, Smita Mohanty and Sanjay K.
Nayak
Waste Management & Research, Vol. 36(6),
495-504 (2018), IF: 4.030
- PLA/ESO/MWCNT nanocomposite: a study on mechanical, thermal and electroactive shape memory
properties
Raghunath S, Kumar S, Samal, S K., Mohanty, S, and Sanjay K. Nayak
Journal of Polymer Research, Vol. 25, 1-12
(2018), IF: 1.434
- High performance epoxy nanocomposite adhesive: Effect of nanofillers on adhesive strength,
curing and degradation kinetics.
R Aradhana, S Mohanty and Sanjay K. Nayak
International journal of adhesion and adhesives, Vol. 84, 238-249 (2018), IF: 2.069
- Eosin-Y sensitized core-shell TiO2-ZnO nano-structured photoanodes for
dye-sensitized solar cell applications
VS Manikandan, AK Palai, S Mohanty and Sanjay K.
Nayak
Journal of Photochemistry and Photobiology B: Biology, Vol. 183, 397-404 (2018), IF: 3.165
- Study of thermal conductivity epoxy adhesive based on adopting hexagonal Boron
Nitride/Graphite hybrids
Rajesh kumar, Sagar Kumar Nayak, Swarnalata Sahoo, Bishnu P Panda, Smita
Mohanty and Sanjay K. Nayak
Journal of Materials Science: Materials in Electronics (JMSE),
Vol. 29(19), 16932-16938 (2018), IF: 2.324
- Surface plasmonic effect of Ag enfold ZnO pyramid nanostructured photoanode for enhanced dye
sensitized solar cell application
VS Manikandan, AK Palai, S Mohanty and Sanjay K.
Nayak
Ceramics International, Vol. 44 (17),
21314-21322 (2018), IF: 3.057
- Preparation and characterization of siloxane modified: Epoxy terminated polyurethane -
silver nanocomposites
A Mathew, S Kurmvanshi, S Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 39 (S4), E2390-E2396
(2018), IF: 1.943
- Hybridization of MWCNTs and reduced graphene oxide on random and electrically aligned
nanocomposite membrane for selective separation of O2/N2 gas pair
SS Swain, L Unnikrishnan, S Mohanty and Sanjay K.
Nayak
Journal of Materials Science, Vol. 53 (22),
15442-15464 (2018), IF: 2.993
- Recent advancements in biopolymer and metal nanoparticle-based materials in diabetic wound
healing management
V Vijayakumar, SK Samal, S Mohanty and Sanjay K.
Nayak
International journal of biological macromolecules, Vol. 122, 137-148, (2018), IF: 3.909
- Influence of Fiber Surface Energy on Mechanical Properties of Sisal Fiber-Bio Based Epoxy
Composites.
S Rajkumar, RJ Bensingh, MA Kader and Sanjay K.
Nayak
Journal of Polymer Materials 35 (4) (2018),
IF: 0.355
- Cold crystallization kinetics of biodegradable polymer blend; controlled by reactive
interactable and nano nucleating agent
PJ Jandas, S Mohanty and Sanjay K. Nayak
Advanced Composites and Hybrid Materials Vol.
1 (3), 624-634 (2018), IF: 0.84
- Synthesis, characterization of reduced graphene oxide nanosheets and its reinforcement
effect on polymer electrolyte for dye sensitized solar cell applications
K Prabakaran, PJ Jandas, S Mohanty and Sanjay K.
Nayak
Solar Energy 170, 442-453 (2018), IF: 4.374
- Synthesis and characterization of petroleum and biobased epoxy resins: a review
S Kumar, S Krishnan, S Mohanty and Sanjay K.
Nayak
Polymer International, Vol. 67 (7), 815-839
(2018), IF: 2.352
- Recent Developments on Epoxy Based Thermally Conductive Adhesives (TCA): A Review
Amit Kumar Singh, Bishnu Prasad Panda, Smita Mohanty, Sanjay K. Nayak and Manoj Kumar Gupta
Polymer-Plastics Technology and Engineering, Vol. 57 (9), 903-934 (2018), IF: 1.655
- Bio-based tri-functional epoxy resin (TEIA) blend cured with anhydride (MHHPA) based
cross-linker: Thermal, mechanical and morphological characterization
S Kumar, SK Samal, S Mohanty and Sanjay K.
Nayak
Journal of Macromolecular Science, Part A, Vol. 55 (6), 496-506 (2018), IF: 1.057
- Multi-Stage recycling Induced Morphological transformations in Solid-State microcellular
Foaming of Polystyrene
I Singh, A Gandhi, M Biswal, S Mohanty and Sanjay K.
Nayak
Cellular Polymers, Vol. 37 (3), 121-149
(2018), IF: 1.661
- Effect of acrylation on the properties of waterborne epoxy: evaluation of physicochemical,
thermal, mechanical and morphological properties
S Pradhan, S Mohanty and Sanjay K. Nayak
Journal of Coatings Technology and Research, Vol. 15 (3), 515-526, (2018), IF: 1.298
- Synthesis and Properties of Hydrogels Prepared by Various Polymerization Reaction
Systems
N Ranganathan, R Joseph Bensingh, M Abdul Kader and Sanjay K. Nayak
Cellulose-Based Superabsorbent Hydrogels, 1-25
(2018)
- Mechanical and Thermal Properties of Epoxy Composites Reinforced with Carbon and Pineapple
leaf fiber
AS Babu, TT Nagarajan, K Palanivelu and Sanjay K.
Nayak
Journal of Polymer Materials, Vol. 35 (1),
59-69 (2018), IF: 0.355
- Mechanical and damage tolerance behavior of short sisal fiber reinforced recycled
polypropylene biocomposites
M Naushad, Sanjay K. Nayak, S
Mohanty and BP Panda
Journal of Composite Materials, 51 (8),
1087-1097 (2017), IF: 1.494
- Synthesis and properties of castor oil-based waterborne polyurethane closite 30B
nanocomposite coatings
S.S. Panda, BP Panda, S Mohanty and Sanjay K.
Nayak
Journal of Coatings Technology and Research, 14 (2), 377-394 (2017), IF: 1.557
- Mechanical and morphological investigation of virgin polyethylene and silver nanoparticles
loaded nanocomposite films: Comprehensive analysis of kinetic models for non-isothermal
crystallization
R.K Sahoo, S Mohanty, Sanjay K. Nayak and BP Panda
Bulletin of Material science, 40 (2), 307-320
(2017) IF: 0.899
- Study of UV aging on the Performance Characteristics of Vegetable oil and Palm oil Derived
Isocyanate based Polyurethane
Sonalee Das, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Korean Journal of Chemical Engineering, 34
(2), 523-538, (2017), IF: 2.007
- Composition analysis and characterization of waste polyvinyl chloride (PVC) recovered from
data cables
Sunil S Suresh, Smita Mohanty and Sanjay K.
Nayak
Waste Management, 60, 100-111 (2017), IF: 4.030
- Numerical and experimental validation of natural fiber orientation in viscous fluid of
injection cavity.
Rajashekaran Karthikeyan, Jimi Tjong, Sanjay K.
Nayak and Mohini M. Sain
Journal of Natural Fibers, 1-11, (2017), IF: 0.730
- Effect of natural fiber network on permeability and tensile strength of composites through
vacuum infusion process.
Rajkumar Subbiah, Jimi Tjong, Sanjay K.
Nayak and M. Sain
Journal of Natural Fibers, 14 (2), 278-286
(2017), IF: 0.730
- Synthesis and characterization of waterborne epoxy derived from epoxidized soybean oil and
isoderived C-36 dicarboxylic acid
Sukanya Pradhan, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Journal of Coatings Technology and Research, 14 (4), 915-926 (2017), IF: 1.557
- The castor oil based water borne polyurethane dispersion: effect of –NCO/OH content:
Synthesis, characterization and properties
S.S. Panda, B P Panda, Smita Mohanty and Sanjay K.
Nayak
Journal of Green Processing & Synthesis, 6
(3), 341-351 (2017), IF: 0.782
- Epoxidized soybean oil based epoxy blend cured with anhydride based crosslinker: Thermal and
mechanical characterization
Sudheer Kumar, Sushanta K Samal, Smita Mohanty and Sanjay K. Nayak
ACS Industrial & Engineering Chemistry Research, 56 (3), 687–698 (2017), , IF: 2.843
- Effect of Alkyl Phenol from Cashew Nutshell Liquid and Sisal Fiber Reinforcement on Dry
Sliding Wear Behavior of Epoxy Resin
Rajesh Panda, Jimi Tjong, Sanjay K. Nayak and M. Sain
Journal of Natural Fibre, 14 (5), 747-758
(2017), IF: 0.730
- Synthesis and characterization of vegetable oil based polyurethane derived from low viscous
bio aliphatic isocyanate: Adhesion strength to wood-wood substrate bonding
Swarnalata Sahoo, Smita Mohanty and Sanjay K.
Nayak
Macromolecular Research Volume 25(8),
772–778, (2017) IF: 1.405
- Studies on poly (ester-urea-imide) s containing epoxy segment
JC Patel, Sanjay K. Nayak and
HS Patel
International Journal of Plastics Technology 21 (1), 227-238, (2017)
- Evaluation of biodegradability of green polyurethane/nanosilica composite synthesized from
transesterified castor oil and palm oil based isocyanate
Sonalee Das, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
International Journal of Biodeterioration and Biodegradation,
117, 278-288 (2017), IF: 2.900
- An Insight on Castor Oil Based Polyurethane and Nanocomposites: Recent Trends and
Development
Sonalee Das, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Polymer-Plastics Technology and Engineering, 56(14), 1556-85 (2017), IF: 1.232
- Meticulous study on curing kinetics of green polyurethane-clay nanocomposite adhesive
derived from plant oil: Evaluation of decomposition activation energy using TGA
Analysis.
S Sahoo, H Kalita, S Mohanty and Sanjay K.
Nayak
Journal of Macromolecular Science, Part A 54
(11), 819-826 (2017), IF: 0.963
- Investigation into the influence of UV aging on green polyurethane/ nanosilica composite
coatings based on transesterified castor oil and palm oil isocyanate
Sonalee Das, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Journal of Inorganic and Organometallic Polymers and Materials,
27 (3), 641-657 (2017), IF: 1.740
- Synthesis and Characterization of Vegetable oil based Polyurethane derived from Biobased
isocyanate
S Sahoo, H Kalita, S Mohanty and Sanjay K.
Nayak
Journal of Polymer Materials 34 (3), 591-603,
(2017), IF-0.355
- Waterborne epoxy adhesive derived from epoxidized soybean oil and dextrin: Synthesis and
characterization
Sukanya Pradhan, Smita Mohanty and Sanjay K.
Nayak
International Journal of Polymer Analysis and Characterization,
Vol. 22 (4), 318-329 (2017), IF: 2.470
- The effect of dynamic crosslinking on morphology, thermal and mechanical properties of
polylactic acid and bioelastomer blend
Krishnan, S.; Mohanty, S.; Sanjay K. Nayak
Journal of Macromolecular Science, Part A: Pure and Applied Chemistry
54 (9), 547-555, (2017), IF: 0.963
- Biobased Epoxy Blends from Epoxidized Castor Oil (ECO): Effect on Mechanical, Thermal and
Morphological Properties
Sudha G S, Hemjyoti Kalita, Smita Mohanty and Sanjay
K. Nayak
Macromolecular Research 25 (5), 420-430
(2017), IF: 1.405
- Mechanical, Thermal, and Interfacial Characterization of Randomly Oriented Short Sisal
Fibers Reinforced Epoxy Composite Modified with Epoxidized Soybean Oil
SK Sahoo, S Mohanty and Sanjay K. Nayak
Journal of Natural Fibers 14 (3), 357-367,
(2017)
- Preparation and characterization of recycled blends using poly (vinyl chloride) and
poly(methyl methacrylate) recovered from waste electrical and electronic equipments
Sunil S Suresh, Smita Mohanty and Sanjay K.
Nayak
Journal of Cleaner Production 149, 863 –
873 (2017), IF: 5.71
- Identification and thermomechanical characterization of polymers recovered from mobile phone
waste
P Sarath, S Bonda, S Mohanty and Sanjay K.
Nayak
Journal of Material Cycles and Waste Management 19 (4), 1391-1399, (2017)
- Effect of Nanocalcium Carbonate content on the Properties of PLA Nano composites.
Ankit Pundir, P.S.G. Krishnan and Sanjay K.
Nayak
Journal of Composites Biodegradable Polymers, 5, 26-33, (2017)
- Effect of Sepiolite content on Hydrophilicity and Thermal stability of Poly (butyl lactate
methacrylate)
M.Purushothaman, P.S.G. Krishnan and Sanjay K.
Nayak
Journal of Renewable Material, 5 (5), 363-370,
(2017), IF: 1.427
- Effect of polyester polyol chain length on the properties of transparent poly
(ester-urethane-acrylate)/MMA copolymer for optical applications
SD Maurya, SK Kurmvanshi, S Mohanty and Sanjay K.
Nayak
International Journal of Adhesion and Adhesives, Vol. 77, 164-173 (2017), IF: 2.211
- Synthesis and Characterizations of Sustainable Polyester Polyols from Non-Edible Vegetable
Oils: Thermal and Structural Evaluation
S Jayavani, S Sunanda, TO Varghese and Sanjay K.
Nayak
Journal of Cleaner Production, Vol. 162 (20),
795-805 (2017), IF: 5.71
- Influence of nanoclay and graft copolymer on the thermal and flammability properties of poly
(lactic acid)/banana fiber biocomposites
VP Sajna, S Mohanty and Sanjay K. Nayak
Journal of Vinyl and Additive Technology, Vol.
23:E81–E91 (2017)
- Moisture absorption behavior of hybrid bionanocomposites of polylactic acid and evaluation
of physicochemical properties
VP Sajna, S Mohanty and Sanjay K. Nayak
Journal of Thermoplastic Composite Materials, Vol. 30 (4), 521-544 (2017)
- Study on metal decorated oxidized multiwalled carbon nanotube (MWCNT)-epoxy adhesive for
thermal conductivity applications
AK Singh, BP Panda, S Mohanty, Sanjay K.
Nayak and MK Gupta
Journal of Materials Science: Materials in Electronics Vol. 28 (12), 8908-8920 (2017), IF: 2.019
- Castor Oil Modified by Epoxidation, Transesterification and Acrylation Process:
Spectroscopic Characteristics
GS Sudha, H Kalita, S Mohanty and Sanjay K.
Nayak
International Journal of Polymer Analysis and Characterization,
Vol. 22 (6), 519-525 (2017), IF: 2.470
- Study of curing kinetics of anhydride cured petroleum-based (DGEBA) epoxy resin and
renewable resource based epoxidized soybean oil (ESO) systems catalyzed by
2-methylimidazole
S Kumar, SK Samal, S Mohanty and Sanjay K.
Nayak
Thermochimica Acta, Vol. 654(10), 112-120
(2017), IF: 2.236
- Preparation, characterization, and properties of castor oil-based flexible
polyurethane/Cloisite 30B nanocomposites foam
SS Panda, SK Samal, S Mohanty and Sanjay K.
Nayak
Journal of Composite Materials, Vol. 52 (4),
531-542 (2017), IF: 1.494
- Effect of nanofillers on selectivity of high performance mixed matrix membranes for
separating gas mixtures
Suchhanda Srabanee Swain, Lakshmi Unnikrishnan, Smita Mohanty, and
Sanjay K. Nayak
Korean Journal of Chemical Engineering, Vol.
34 (8), 2119-2134 (2017), IF: 2.007
- Renewable Resource based blends of Polylactic acid (PLA) and Thermoplastic starch (TPS)
using Novel Reactive Compatibilization
S Krishnan, S Mohanty and Sanjay K. Nayak
Journal of Polymer Materials, Vol. 34 (3),
525-538 (2017), IF: 0.355
- Zwitterionic–polyurethane coatings for non-specific marine bacterial inhibition: A
nontoxic approach for marine application
S. Anthony Yesudass, Smita Mohanty, Sanjay K.
Nayak and Chandi C.Rath
European Polymer Journal, Vol. 96, 304-315
(2017), IF: 3.531
- Biobased epoxy/carbon fiber composites: Effect on mechanical, thermo-mechanical and
morphological properties
Sudha G S, Hemjyoti Kalita, Smita Mohanty and Sanjay
K. Nayak
Journal of Macromolecular Science Part A, Vol.
54(10), 756-764 (2017), IF: 0.963
- Influence of diisocyanate, glycidol and polyol molar ratios on the mechanical and thermal
properties of glycidyl-terminated biobased polyurethanes
Aiswarea Mathew, Surendra Kurmvanshi, Smita Mohanty and Sanjay K. Nayak
Polymer International, Vol. 66(11), 1546-54
(2017), IF: 2.070
- Itaconic acid used as a versatile building block for the synthesis of renewable resource
based Resins and Polyesters for Future Prospective: A Review
Sudheer Kumar, Sukhila Krishnan, Sushanta K Samal, Smita Mohanty,
Sanjay K. Nayak
Polymer International, 66
(10),1349–1363, 2017, IF: 2.070
- Synergistic effect of hybrid graphene and boron nitride on the cure kinetics and thermal
conductivity of epoxy adhesives: Hybrid Graphene and Boron Nitride
Amit Kumar Singh, Bishnu Prasad Panda, Smita Mohanty, Sanjay K. Nayak and Manoj Kumar Gupta
Polymers for Advanced Technologies, Vol. 28
(12), 1851-1864 (2017), IF: 1.907
- Mechanical, thermal and accelerated weathering studies of bio-based Polyurethane/clay
nanocomposites coatings
Hemjyoti Kalita, Rashmirekha Kamila, Smita Mohanty and Sanjay K. Nayak
Advances in Polymer Technology, Vol. 37(6),
1954-1962 (2017), IF: 1.291
- Bio-based epoxidised oil for compatibilization and value addition of poly (vinyl chloride)
(PVC) and poly(methyl methacrylate) (PMMA) in recycled blend
Sunil S. Suresh, Smita Mohanty and Sanjay K.
Nayak
Journal of Polymer Research, Vol. 24(8) 120
(2017), IF: 1.615
- Recent developments in elastomeric heat shielding materials for solid rocket motor casing
application for future perspective
Kesiya George, Bishnu P. Panda, Smita Mohanty and Sanjay K. Nayak
Polymers for Advanced Technologies, 29(1),
8-21 (2017), IF: 1.907
- Influence of structure-property relationship on the optical, thermal and mechanical
properties of castor oil based transparent polyurethane for catheter applications
Aiswarea Mathew, Surendra Kurmvanshi, Smita Mohanty and Sanjay K. Nayak
Journal of Macromolecular Science, Part A Pure and Applied Chemistry,
Vol. 54(11), 772-781 (2017), IF: 0.963
- Investigation into the mechanical and thermal properties of poly (methyl methacrylate)
recovered from light guidance panels with a focus on future remanufacturing and sustainable
waste management.
SS Suresh, S Mohanty and Sanjay K. Nayak
Journal of Remanufacturing, Vol. 7 (2-3),
217-233 (2017)
- Aligned multi-walled carbon nanotubes (MWCNT) and vapor grown carbon fibers (VGCF)
reinforced epoxy adhesive for thermal conductivity applications
Amit Kumar Singh, Ashutos Parhi, Bishnu Prasad Panda, Smita Mohanty,
Sanjay K. Nayak and Manoj Kumar
Gupta
Journal of Materials Science: Materials in Electronics, Vol. 28(23), 17655–17674 (2017), IF: 2.019
- Thermokinetics behavior of epoxy adhesive reinforced with low viscous aliphatic reactive
diluent and nano-fillers
Amit Kumar Singh, Bishnu Prasad Panda, Smita Mohanty, Sanjay K. Nayak and Manoj Kumar Gupta
Korean J. Chem. Eng., Vol. 34 (11), 3028-3040
(2017), IF: 2.007
- Synthesis and characterization of crosslinked transparent poly(ester-urethane-acrylate)
containing methyl methacrylate
Shyam Dev Maurya, Surendra K. Kurmvanshi, Smita Mohanty and Sanjay K. Nayak
Macromolecular Research, Vol. 25(9),
871–881 (2017), IF: 1.405
- Mechanical Behavior of Castor-Oil-Based Advanced Polyurethane Functionalized with Glycidol
and Siloxanes
Aiswarea Mathew, Surendra Kurmvanshi, Smita Mohanty and Sanjay K. Nayak
The Journal of The Minerals, Metals & Materials Society,
Vol. 69(12), 2501-2507 (2017), IF: 1.86
- Carbon nanotubes as potential candidate for separation of H2 CO2 gas
pairs
Suchhanda S. Swain, Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K. Nayak
International Journal of Hydrogen Energy, Vol.
42 (49), 7 (2017), IF 3.582
- Synthesis and Characterization of Nanoclay-Reinforced Trifunctional
“Bioresin-Modified” Epoxy Blends Enhanced with Mechanical and Thermal
Properties
Sudheer Kumar, Sushanta K. Samal, Smita Mohanty and Sanjay K. Nayak
ChemistrySelect, Vol. 2 (35),
11445–11455 (2017)
- Physical, Mechanical, Surface, Thermal and Morphological studies of PLA-sepiolite
bionanocomposites
Anil Kumar, Manju P, PSG Krishnan and Sanjay K.
Nayak
Journal of Minerals, Metallurgy and Materials Engineering, Vol. 3 (103), (2017)
- Toughening of Polylactic Acid: An Overview of Research Progress
Sukhila Krishnan, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Polymer-Plastics Technology and Engineering, 55 (15), 1623-1652, (2016), IF: 1.232
- Effect of nanoclay on the nucleation, crystallization and melting behaviour of
polypropylene: A study on non-isothermal crystallization kinetics.
Sahoo, Rajesh K., Smita Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 29(11), 1554-1572, (2016), IF: 0.903
- Eco-Friendly Lignocellulosic Natural Fibre Reinforced Recycled Polymer Composite with
Modified Interface and Reactive Compatibilization: A Micromechanical Analysis with Various
Model
Arun Kumar Gupta, Manoranjan Biswal, Smita Mohanty and Sanjay K. Nayak
Materials Focus, Vol. 5 (2), 106-118,
(2016)
- Property evaluation of nanostructured fly ash rein forced Acrylonitrile Butadiene Styrene
(ABS) nanocomposites
S Bonda, Smita Mohanty and Sanjay K. Nayak
Journal of Thermoplastic Composite Materials, Vol. 29(12), 1611-1626, (2016), IF: 0.903
- Effect of Cloisite 30B clay and Sisal Fiber on Dynamic Mechanical and Fracture behavior of
unsaturated Polyester toughened Epoxy network
N Reddy, Smita Mohanty and Sanjay K. Nayak
Polymer Composites, 9 (37), 2832-2846 (2016),
IF: 1.324
- Compatibility Effect of Titanium Dioxide Nanofiber on Reinforced Biobased Nanocomposites:
Thermal. Mechanical and Morphology Characterization.
Suresh D, Smita Mohanty and Sanjay K.
Nayak
Journal of Vinyl and Additive Technology, Vol.
22 (4), 529-538, (2016), IF: 1.558
- Effect of Nanoclay on the Mechanical, Thermal and Water Absorption Properties of an
UP-Toughened Epoxy Network
NR Paluvai, S Mohanty and Sanjay K. Nayak
The Journal of Adhesion, Vol. 62 (10), 840-861
(2016), IF: 1.628
- Structure property relation of hybrid biocomposites based on jute, viscose and
polypropylene: The effect of the fibre content and the length on the fracture toughness and
the fatigue properties
Nalini Ranganathan, Kristiina Oksman, Sanjay K.
Nayak and Mohini Sain
Composites Part A, Vol. 83, 169–175
(2016)
- Hyperbranched Polymers for Coating Applications: A Review
T. Gurunathan, Smita Mohanty and Sanjay K.
Nayak
Polymer-Plastics Technology and Engineering, Vol. 55, (1), 92-117, (2016), IF: 1.232
- An Insight on the Chemistry of Epoxy and its Curing for Coating Applications: A Detailed
Investigation
Sukanya Pradhan, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Polymer-Plastics Technology and Engineering, Vol. 55 (8), 862-877, (2016), IF: 1.232
- Influence of surface modified Cellulose microfibrils on the improved mechanical properties
of poly(lactic acid)
Atul Prakash Johari, SK Kurmvanshi, Smita Mohanty and Sanjay K. Nayak
International Journal of Biological Macromolecules, Vol. 84, 329-339, (2016), IF: 3.671
- Effect of long fiber thermoplastic extrusion process on fiber dispersion and mechanical
properties of viscose fiber/polypropylene composites
Ranganathan, N, Oksman, K, Sanjay K. Nayak and Sain, M,
Polymers for Advanced Technologies, Vol. 27,
(5), 685–692, (2016), IF: 1.907
- Analysis and evaluation of biobased polyester of PTT/PBAT blend: Thermal, dynamic
mechanical, interfacial bonding, and morphological properties
Suresh Dhandapani, Sanjay K. Nayak and Smita Mohanty
Polymers for Advanced Technologies, Vol. 27
(7), 938–945 (2016), IF: 1.907
- Influence of Different Treated Cellulose Fibers on the Mechanical and Thermal Properties of
Poly(lactic acid)
Atul Prakash Johari, Smita Mohanty and Sanjay K.
Nayak
ACS Sustainable Chem. Eng., 4(3), pp
1619–1629 (2016), IF: 5.951
- Cure kinetics characterization of soy-based epoxy resins for infusion molding process
Rajkumar Subbiah, Jimi Tjong, Sanjay K.
Nayak and Mohini Sain
The Canadian Journal of Chemical Engineering, Vol. 94 (7), 1375–1380, (2016), IF: 1.356
- Effect of Nanosilica on the Physicochemical, Morphological and Curing Characteristics of
Transesterified Castor Oil Based Polyurethane Coatings
Sonalee Das, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Progress in Organic coatings, Vol. 97,
233–243 (2016), IF: 2.680
- Bio-based Thermosetting Resins for Future Generation: A Review
Srikant K Bobade, Nagarjuna Reddy Paluvai, Smita Mohanty and Sanjay K. Nayak
Polymer-Plastics Technology and Engineering, 55(17), 1863-1896 (2016), IF: 1.232
- Synthesis of Vegetable oil based Polyurethane: A study on curing kinetics behaviour
Swarnalata Sahoo, H Kalita, Smita Mohanty and Sanjay
K. Nayak
International Journal of Chemical Kinetics, 48(10), 622–634 (2016), IF: 1.386
- Investigation of fibre orientation using SEM micrograph and prediction of mechanical
properties through micromechanical modelling
Suchhanda Srabanee Swain, Sushanta K Samal, Smita Mohanty and Sanjay K. Nayak
Bulletin of Materials Science, Vol. 39 (3),
837-846, (2016), IF: 0.899
- Effect of Butyl Lactate Methacrylate Content on the Properties of Acrylic acid
Copolymers
M. Purushothaman, P. S. G. Krishnan and Sanjay K.
Nayak
Polymer Science Series A, 58 (3), 368-378
(2016), IF: 0.822
- Effect of silver nanoparticles on the morphology, crystallization, and melting behavior of
polypropylene: A study on non-isothermal crystallization kinetics
Sahoo, Rajesh K., Smita Mohanty and Sanjay K.
Nayak
Polymer Science Series A, Vol 58 (3),
443–453 (2016), IF: 0.822
- Gas Phase Synthesis of Carbon Nanotubes by Vapour Deposition Method: Evaluation of
Morphological Behaviour
A.K.Singh, BP Panda, S Mohanty and Sanjay K.
Nayak
Materials Focus, 5(6), 529-536, (2016)
- Thermal decomposition kinetics of an epoxy resin with alkyl phenol
Rajesh Panda, Jimmy Tjong, Sanjay K. Nayak and Mohini M. Sain
Indian Journal of Applied Research, (2016)
- Damage tolerance behaviour of cloisite 15A incorporated recycled polypropylene
nanocomposites and bionanocomposites
Naushad, M., Sanjay K. Nayak,
Mohanty, S., Kalita, H. and Panda, B.P.
Journal of Experimental Nanoscience, 11(14),
1110-1126 (2016)
- Evaluation of flammability and shear performance of layered-silicate-reinforced styrenic
polymer
L. Unnikrishnan, S. Mohanty and Sanjay K.
Nayak
Journal of Thermal Analysis & Calorimetry, 125 (1) 187–197 (2016), IF: 1.953
- Toughening of polylactic acid using styrene ethylene butylene styrene: Mechanical, thermal,
and morphological studies.
Sangeetha, V.H., Varghese, T.O. and Sanjay K.
Nayak
Polymer Engineering & Science, 56(6),
669–675 (2016), IF: 1.449
- Recent development and future trends in coir fiber reinforced green polymer composites:
Review and evaluation.
Jayavani S, Deka, H., Varghese, T.O. and Sanjay K.
Nayak
Polymer Composites, 37(11), 3296–3309
(2016), IF: 2.324
- Mechanical Properties and Cross-Linking Density of Short Sisal Fiber Reinforced Silicone
Composites.
Rajashekaran Karthikeyan, Jimi Tjong, Sanjay K.
Nayak and Mohini M. Sain
BioResources, 12(1), 211 – 227 (2016),
IF: 1.334
- Super toughened renewable poly(lactic acid) based ternary blends system: effect of degree of
hydrolysis of ethylene vinyl acetate on impact and thermal properties.
V. H. Sangeetha, Ravi babu Valapa, Sanjay K.
Nayak and T. O. Varghese
RSC Advances, 6(76), 72681-72691, (2016),
IF: 3.108
- Reactive Compatibilization of Biobased Polyurethane Prepolymer Toughening Polylactide
Prepared by Melt Blending
T Gurunathan, JS Chung and Sanjay K. Nayak
Journal of Polymers and the Environment 24
(4), 287-297 (2016), IF: 1.877
- The influence of reactive organoclay on a biorenewable castor oil based polyurethane
prepolymers toughened polylactide nanocomposites
T Gurunathan and Sanjay K. Nayak
Polymers for Advanced Technologies 27 (11),
1484-1493, (2016)
- Recent development and future trends in coir fiber-reinforced green polymer composites:
Review and evaluation
H Deka, TO Varghese and Sanjay K. Nayak
Polymer Composites 37 (11), 3296-3309 (2016)
- Fabrication and characterization of bionanocomposites based on poly (lactic acid), banana
fiber and nanoclay
VP Sajna, S Mohanty and Sanjay K. Nayak
International Journal of Plastics Technology 20 (1), 187-201 (2016)
- Effect of poly (lactic acid)-graft-glycidyl methacrylate as a compatibilizer on properties
of poly (lactic acid)/banana fiber biocomposites
Sajna VP, Smita Mohanty and Sanjay K.
Nayak
Polymers for Advanced Technologies 27 (4),
515-524 (2016)
- Estimation of Energy Absorption of Rubber Toughened Polycarbonate Blend Nanocomposite: The
Effects of Loading Rate and Temperature
BP Panda, SK Bharti, S Mohanty and Sanjay K.
Nayak
Materials Focus 5 (1), 31-39 (2016)
- Mechanical and Thermal Properties of PALF Reinforced Epoxy Composites
TT Nagarajan, AS Babu, K Palanivelu and Sanjay K.
Nayak
Macromolecular Symposia 361 (1), 57-63 (2016)
- Weathering and Biodegradation Study on Graft Copolymer Compatibilized Hybrid
Bionanocomposites of Poly (Lactic Acid)
VP Sajna, Sanjay K. Nayak and
S Mohanty
Journal of Materials Engineering and Performance 25 (7), 2895-2906 (2016)
- Evaluation of properties of industrial waste filled polymer composites for automobile
applications
Bonda, S, Mohanty, S and Sanjay K. Nayak
Materials Science and Technology, Vol. 31 (8)
996-1006, (2015)
- A Candid Approach of Clay Modification via Dehydroxylation, for Nanocomposites Application:
Investigation of Degradation Kinetics, Reaction Model and Flammability
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
Advances in Polymer Technology, Vol. 34 (2),
21489, (2015), IF: 1.291
- Mechanism of Toughening in Rubber Toughened Polyolefin-A Review.
Panda, B. P., Mohanty, S., and Sanjay K.
Nayak
Polymer-Plastics Technology and Engineering, Vol. 54 (5), 462-473, (2015), IF: 1.232
- Study of Superconductive behavior on YB2Cu3O/Polyaniline composite
B. Balamanigandan, K.P. Bhuvana, K. Palanivelu and Sanjay K. Nayak
International Journal of Scientific Engineering and Applied Science,
6, 2395-3470, (2015), IF: 2.234
- Studies on Thermal degradation and Flame Retardant behaviour of the sisal fiber reinforced
Unsaturated Polyester toughened Epoxy nanocomposites
N Reddy, Smita Mohanty and Sanjay K. Nayak
Journal of Applied Polymer Science, Vol.
132(24), 42068, (2015), IF: 1.600
- Synthesis and Characterization of Acrylated Epoxidized Castor Oil Nanocomposites
N Reddy, Smita Mohanty and Sanjay K. Nayak
International Journal of Polymer Analysis and Characterization,
Vol. 20 (4), 298-306, (2015), IF: 2.470
- Cure kinetics of exfoliated bio-based epoxy/clay nanocomposites developed from acrylated
epoxidized castor oil and diglycidyl ether of bisphenol A networks
N Reddy, Smita Mohanty and Sanjay K. Nayak
High Performance Polymers, 27 (8), 918-929, (2015), IF: 1.179
- Fabrication and Evaluation of Acrylated Epoxidized Castor oil toughened Diglycidyl ether
Bisphenol A Nanocomposites
N Reddy, Smita Mohanty and Sanjay K. Nayak
The Canadian Journal of Chemical Engineering, Vol 93 (12), 2107–2116 (2015), IF: 1.356
- Isocyanate terminated castor oil-based polyurethane prepolymer: Synthesis and
characterization
T. Gurunathan, Smita Mohanty and Sanjay K.
Nayak
Progress in Organic Coatings, Vol. 80,
39–48, (2015), IF: 2.680
- Effect of reactive organoclay on physicochemical properties of vegetable oil-based
waterborne polyurethane nanocomposites
T. Gurunathan, Smita Mohanty and Sanjay K.
Nayak
RSC Advances, Vol. 5, 11524-11533, (2015),
IF: 3.108
- Structure-Property Relationship of Layered Metal Oxide Phosphonate/Chitosan Nanohybrids for
Transducer in Biosensing Device,
Sriparna De, Smita Mohanty and Sanjay K.
Nayak
Journal of Materials Engineering and Performance, Vol. 24 (1), 114-127, (2015), IF: 1.331
- Nanostructured Cerium Oxide Reinforced Green Composites for Enzymatic Glucose
Biosensor
Sriparna De, Smita Mohanty and Sanjay K.
Nayak
Sensor Letters, Vol. 13 (3), 209-218(10),
(2015)
- PEO/PVDF–HFP electrolytes for natural dye sensitized solar cell applications: effect
of modified nano-TiO2 on electrochemical and photovoltaic performance
K. Prabakaran, S. Mohanty and Sanjay K.
Nayak
Journal of Materials Science: Materials in Electronics, Vol. 26 (6), 3887-3897, (2015), IF: 2.019
- Synthesis and characterization of bio-based epoxy blends from renewable resource based
epoxidized soybean oil as reactive diluents.
Sushanta K Sahoo, Smita Mohanty and Sanjay K.
Nayak
Chinese Journal of Polymer Science, Springer Publication, Vol. 33(1), 137-152, (2015), IF: 1.692
- Toughened bio-based epoxy blend network modified with transesterified epoxidized soybean
oil: Synthesis and characterization.
Sushanta K Sahoo, Smita Mohanty and Sanjay K.
Nayak
RSC Advances, Vol. 5, 13674-13691, (2015),
IF: 3.108
- Surface Modification of oil palm fruit bunch fiber reinforcement effect on bio-based
polyester matrix composites: Dynamic, morphology, thermal and mechanical properties.
Suresh D, Smita Mohanty and Sanjay K.
Nayak
Journal of Elastomer and Plastics, Vol. 48
(5), 456-479 (2015), IF: 0.714
- Non-isothermal Crystallization Kinetics and Activation energy of based poly (trimethylene
terephthalate)/poly (butylene adipate-co-terephthalate) Polyester Blend
Suresh D, Smita Mohanty and Sanjay K.
Nayak
Polymer Science Series A, Vol. 57 (5),
628-634, (2015), IF: 0.822
- Preparation and Characterization of Lignin Nanofibre by Electrospinnig Technique
Arun Kumar Gupta, Smita Mohanty and Sanjay K.
Nayak
International Journal of Scientific Engineering and Applied Science
(IJSEAS), Vol.1 (3), 184-190, (2015)
- Studies on Hydrophilicity and Thermal Stability of Poly(isoalkyl lactate
methacrylate)s
M. Purushothaman, P. Santhana Gopala Krishnan and Sanjay K. Nayak
Journal of Macromolecular Science Part A. Vol.
52(3), 202-209, (2015), IF: 1.020
- Polymer electrolyte membrane from cloisite 30B based solid proton conductor and sulfonated
polyether ether ketone/ polyvinylidene fluoride-co-hexafluoro propylene blends for direct
methanol fuel cell
M. Prasad, S. Mohanty and Sanjay K. Nayak
RSC Advances, Vol 105 (4), 61178-61186,
(2015), IF: 3.108
- Polymer electrolyte membrane from based on sulfonated polysulfone and functionalized layered
silicate for direct methanol fuel cell Applications
M. Prasad, S. Mohanty and Sanjay K. Nayak
High Performance Polymer, Vol. 27 (6),
714-723, (2015), IF: 1.179
- Improved Electrochemical and Photovoltaic performance of dye sensitized solar cell based on
PEO/ PVdF-HFP/Silane modified TiO2 electrolytes and Nafion® /MWCNT counter
electrode
Prabakaran Karuppanan, Smita Mohanty and Sanjay K.
Nayak
RSC Advances, Vol. 5, 40491-40504 (2015),
IF: 3.108
- Nano-CeO2-Decorated Graphene-Based Chitosan Nanocomposites As Enzymatic
Biosensing Platform: Fabrication And Cellular Biocompatibility Assessment
Sriparna De, Smita Mohanty and Sanjay K.
Nayak
Bioprocess and Biosystems Engineering, Vol.
38(9):1671-83, (2015), IF: 1.870
- Influence of NCO/OH and transesterified castor oil on the structure and properties of
polyurethane: Synthesis and characterization
Sonalee Das, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
Material. Express, Vol. 5, 377-389 (2015)
- Miscibility evaluation of polystyrene and poly(methyl methacrylate) blends: Analysis of
mechanical, thermal, morphology, and viscoelastic properties
Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K.
Nayak
International Journal of Polymer Science & Engineering, 1(2), 8-18, (2015)
- Fire performance of polymer nano-composites
Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K.
Nayak
International Journal of Composites and Constituent Materials,
1(1), 1-13, (2015)
- Recovery and utilisation of non-metallic fraction from waste printed circuit boards in
polypropylene composites
M. Biswal, N. Jada, S. Mohanty and Sanjay K.
Nayak
Plastics, Rubber and Composites, Vol. 44 (8),
314-321 (2015)
- Effect of Reprocessing and Accelerated Weathering on Impact Modified Recycled blend
Ramesh V, Manoranjan Biswal, Smita Mohanty and Sanjay K. Nayak
Journal of Materials Engineering and Performance, Vol. 24 (12), 5046-5053, (2015), IF: 1.331
- Nanotoxicity of Rare Earth Metal Oxide Anchored Graphene Nanohybrid: A Facile Synthesis and
In Vitro Cellular Response Studies
S. De, S. Mohanty, Sanjay K. Nayak, S. K. Verma and M. Suar
Nano-Brief Reports and Reviews, Vol. 10
(6), 1550091 (2015), IF: 0.760
- A Green Biosensing Matrix Based on Chitosan and Graphene nanohybrid for the Immobilization
of Glucose Oxidase: Synthesis and Property evaluation
Sriparna De, Smita Mohanty and Sanjay K.
Nayak
Journal of Inorganic and Organometallic Polymers and Materials,
Vol. 25 (6), 1332-1344, (2015), IF: 1.740
- Synthesis and characterization of Biobased Polyurethanes from modified castor oil and palm
oil based Isocyanate: Effect of NCO/OH Molar Ratio.
Sonalee Das, Priyanka Pandey, Smita Mohanty and Sanjay K. Nayak
International Journal of Chemical Engineering, Vol.2, 1-8 (2015)
- Study of thermal stability and thermo-mechanical behavior of functionalized soybean oil
modified toughened epoxy/organo clay nanocomposite
Sushanta K. Sahoo, Smita Mohanty and Sanjay K.
Nayak
Progress in Organic Coatings, Vol. 88,
263–271, (2015), IF: 2.680
- Aligned carbon nanotube/polymer hybrid electrolytes for high performance dye sensitized
solar cell applications
K. Prabakaran, Akshaya K. Palai, Smita Mohanty and Sanjay K. Nayak
RSC Advances, Vol. 5(82), 66563-66574, (2015),
IF: 3.108
- Influence of addition of vapor grown carbon fibers on mechanical, thermal and biodegradation
properties of lignin nanoparticle filled bio-poly(trimethylene terephthalate) hybrid
nanocomposites
Arun Kumar Gupta, Smita Mohanty and Sanjay K.
Nayak
RSC Advances, Vol. 5(69), 56028-56036, (2015),
IF: 3.108
- Solid state dye sensitized solar cells: Eosin-Y sensitized
TiO2–ZnO/PEO–PVDF-HFP-MMT electrolytes/MWCNT–Nafion®counter
electrode
K. Prabakaran, Smita Mohanty and Sanjay K.
Nayak
Ceramics International, Part B, Vol. 41 (9),
11824–11835, (2015), IF: 2.986
- Chemically Exfoliated Nanosilicate Platelets Hybridized Polymer Electrolytes for Solid State
Dye Sensitized Solar Cells
Prabakaran Karuppanan, Smita Mohanty and Sanjay K.
Nayak
New Journal of Chemistry, 39, 8602-8613,
(2015), IF: 3.277
- Effect of lignocellulosic fibers on mechanical, thermomechanical and hydrophilic studies of
epoxy modified with novel bioresin epoxy methyl ester derived from soybean oil
Sushanta K. Sahoo, Smita Mohanty and Sanjay K.
Nayak
Polymers for Advanced Technologies, Vol 26
(12), 1619-1626, (2015), IF: 1.907
- Investigation of Mechanical, Thermal and Morphological Behavior of Cloisite-93A Clay
reinforced Poly (Trimethylene Terephthalate) Nanocomposites
Raghwendra Prakash Dwivedi, Arun Kumar Gupta, Bhagyshree, Smita Mohanty
and Sanjay K. Nayak
International Journal of Scientific Engineering and Applied Science
(IJSEAS) Volume-1, Issue-7, ISSN: 2395-3470, (2015)
- Epoxidized castor oil toughened Diglycidyl Ether of Bisphenol A epoxy nanocomposites:
structure and property relationships
NR Paluvai, S Mohanty and Sanjay K. Nayak
Polymers for Advanced Technologies, 26 (12),
1575-1586, (2015), IF: 1.907
- Mechanical and thermal properties of sisal fiber reinforced acrylated epoxidized castor oil
toughened diglycidyl ether of bisphenol A epoxy nanocomposites
NR Paluvai, S Mohanty and Sanjay K. Nayak
Journal of Reinforced Plastics and Composites, Vol. 34 (18) 1476-1490, (2015)
- Unsaturated polyester-toughened epoxy composites: Effect of sisal fiber on thermal and
dynamic mechanical properties
NR Paluvai, S Mohanty and Sanjay K. Nayak
Journal of Vinyl and Additive Technology, Vol.
23 (3), (2015), IF: 1.550
- Investigation of miscibility, crystallinity and phase morphology of a novel bio based
poly(trimethylene terephthalate)/poly(butylene adipate-co-terephthalate) blend
Suresh Dhandapani, Sanjay K. Nayak and Smita Mohanty
Polymer Science Series A, Vol. 57(6), 783-791,
(2015), IF: 0.822
- A review of the recent developments in biocomposites based on natural fibres and their
application perspectives
T. Gurunathan, Smita Mohanty and Sanjay K.
Nayak
Composites Part A-Applied Science and Manufacturing Vol.77, Pages 1–25 (2015), IF: 4.075
- Mobile phone waste management and recycling: Views and trends
P Sarath, S Bonda, S Mohanty and Sanjay K.
Nayak
Waste Management, Vol. 46, 536-545, (2015),
IF: 4.030
- Effect of nanostructured fly ash on mechanical, dynamic mechanical and thermal properties of
PP/ABS blends
S Bonda, S Mohanty and Sanjay K. Nayak
Iranian Polymer Journal, Vol. 24 (7), 595-605
(2015), IF: 1.422
- Permeability and mechanical property correlation of bio based epoxy reinforced with
unidirectional sisal fiber mat through vacuum infusion molding technique
S. Rajkumar, Jimi Tjong, Sanjay K. Nayak and M. Sain
Polymer Composites, DOI: 10.1002/pc.23797,
(2015), IF: 2.324
- Regenerated cellulose fibers as impact modifier in long jute fiber reinforced polypropylene
composites: Effect on mechanical properties, morphology, and fiber breakage
Nalini Ranganathan, Kristiina Oksman, Sanjay K.
Nayak and Mohini Sain
Journal of Applied polymer Science, Vol. 132
(3), (2015), IF: 1.600
- Impact toughness, viscoelastic behavior, and morphology of polypropylene-jute-viscose hybrid
composites
Nalini Ranganathan, Kristiina Oksman, Sanjay K.
Nayak and Mohini Sain
Journal of Applied Polymer Science, Vol. 133
(7), (2015), IF: 1.600
- Mathematical Model to Predict the Orientation of Natural Fiber during Filling Period of
Injected Moulded Cavity
Rajasekaran Karthikeyan, Jimmy Tjong, Sanjay K.
Nayak and Mohini M. Sain
Journal of Science, Technology and Environment, Vol.5 (1), (2015), IF: 2.290
- Structural Effect of Phenalkamine on Mechanical and Tribological Property of Epoxy
System
Rajesh Panda, Jimmy Tjong, Sanjay K. Nayak and Mohini M. Sain
Journal of Science, Technology and Environment, Vol.5 (1), Page (2015), IF: 2.290
- Effect of Alkyl Phenol from Cashew Nutshell Liquid on Mechanical and Dry Sliding Wear
Behavior of Epoxy Resin
Rajesh Panda, Jimmy Tjong, Sanjay K. Nayak and Mohini M. Sain
Bioresources, Vol. 10(3), 4126-4136. (2015),
IF: 1.334
- Solid state metal-free eosin-Y dye sensitized solar cell based on PVdF-HFP electrolytes:
combined effect of surface modified TiO2 and plasticizer on electrochemical and
photovoltaic properties
K. Prabakaran, S. Mohanty and Sanjay K.
Nayak
J Solid State Electrochemistry, Vol. 19, 2465
– 2479, (2015), IF: 2.316
- Synthesis of dialkyl 2-(Methacryloyloxyethyl) phosphonates, their characterization and
polymerization
K. Rajalakshmi, P. S. G. Krishnan and Sanjay K.
Nayak
Polymer Science Series B, 57 (5), 408-416,
(2015), IF: 0.621
- Tunable Hydrophilicity of Poly(ethyl lactate acrylate-co-acrylic acid)
M. Purushothaman, P. S. G. Krishnan and Sanjay K.
Nayak
Journal of Renewable Materials, 3 (4),
292-301, (2015)
- Studies on permeability of sisal fiber mat during thermoset resin filling in vacuum infusion
process.
Rajkumar Subbiah, Jimi Tjong, Sanjay K.
Nayak and Mohini Sain
The Canadian Journal of Chemical Engineering, Vol. 93 (6), 1364-1370, (2015), IF: 1.356
- Preparation of Compatibilised Polypropylene/Organo-Modified Clay Nanocomposites with Its
Effect on the Mechanical, Rheological, Thermal and Morphological Properties
Rajesh Kumar Sahoo, Smita Mohanty and Sanjay K.
Nayak
Materials Focus, 4 (6), 433-444 (2015)
- Wetting behaviour of soy based resin and unsaturated polyester on surface modified sisal
fiber mat
Rajkumar Subbiah, Jimi Tjong, Sanjay K.
Nayak and Mohini Sain
Journal of Reinforced Plastics and Composites, Vol. 34 (10), 807 - 818, (2015), IF: 1.086
- 3D X-ray Computed Tomography Investigation of Fiber Damage and Microfibril Orientation in
Compression and Injection Moulded Composites
Rajasekaran Karthikeyan, Jimmy Tjong, Sanjay K.
Nayak and Mohini M. Sain
International Journal of Innovative Research in Science, Engineering and
Technology, (IJIRSET), Vol. 4 (11), 11140-111422, (2015),
IF: 4.371
- A study on effect of organo modified clay on curing behavior and thermo-physical properties
of epoxy methyl ester based epoxy nanocomposite
Sushanta K. Sahoo, Smita Mohanty and Sanjay K.
Nayak
Thermochimica Acta, 614 (20), 163–170
(2015), IF: 2.236
- Study on the effect of woven sisal fiber mat on mechanical and viscoelastic properties of
petroleum based epoxy and bioresin modified toughened epoxy network
Sushanta K. Sahoo, Smita Mohanty and Sanjay K.
Nayak
Journal of Applied Polymer Science, 132(43)
42699 (2015), IF: 1.600
- Effects of surface modification on physical properties of biocomposites
Rajkumar Subbiah, Jimi Tjong, Sanjay K.
Nayak and M. Sain
Society of Plastics Engineers (SPE) Article
ID: 10. 2417 / spepro.006262 (2015)
- Mechanical and thermal degradation behavior of sisal fiber (SF) reinforced recycled
polypropylene (RPP) composites
Arun Kumar Gupta, Manoranjan Biswal, S. Mohanty and Sanjay K. Nayak
Fibers & Polymers, Vol. 15 (5), 994-1003,
(2014), IF: 1.113
- Effect of PEG on PLA/PEG Blend and its Nanocomposites: A Study of Thermo-Mechanical and
Morphological Characterizationn
Aswini Kumar Mohapatra, S. Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 35 (2),
283–293, (2014), IF: 2.324
- Effects of geometry and temperature on the Mode I interlaminar fracture of filled
Polypropylene/elastomer nanocomposite
Bishnu P. Panda, Smita Mohanty and Sanjay K.
Nayak
Bulletin of Material Science, Vol. 37 (5),
1017–1029, (2014), IF: 0.899
- Study of polymeric nanocomposite membrane made from sulphonated polysufone and nanoclay for
fuel cell application
M. Prasad, S. Mohanty and Sanjay K. Nayak
High Performance Polymers, Vol 26 (5),
578-586, (2014), IF: 1.179
- Study of Thermo-Mechanical and Morphological Behaviour of Biodegradable PLA/PBAT/Layered
Silicate Blend Nanocomposites
Aswini Kumar Mohapatra, S. Mohanty and Sanjay K.
Nayak
Journal of Polymers and Environment, Vol. 22
(3), 398-408, (2014), IF: 1.877
- Properties and characterization of biodegradable PLA/PEG and PLA/PEG/organoclay: A study of
crystallization kinetics, rheology and compostability
Aswini Kumar Mohapatra, S. Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 29 (4), 443-463, (2014), IF: 0.903
- Reinforcing effect and isothermal crystallization kinetics of Poly (3-hydroxybutyrate)
nanocomposites blended with organically modified montmorillonite
K. Prakalathan, Smita mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 35 (5),
999–1012, (2014), IF: 2.324
- Morphology and thermal properties of renewable resource based polymer blend nanocomposite
influenced by reactive compatibilizer
P. J. Jandas, S. Mohanty and Sanjay K.
Nayak
ACS Sustainable Chemistry & Engineering, 2
(3), pp 377–386, (2014), IF: 5.951
- Structural modified aromatic sulfone polymer nanocomposites as polyelectrolyte
membranes
Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K.
Nayak
High Performance Polymers, Vol. 26 (5),
550-560 (2014), IF: 1.179
- Recycling of Engineering Plastics from waste electrical and electronic equipments: Influence
of Virgin Polycarbonate and Impact Modifier on the Final Performance of blends
Ramesh V, Manoranjan Biswal, S. Mohanty and Sanjay
K. Nayak
Waste Management & Research, Vol. 32 (5),
379-88. (2014), IF: 1.803
- A Novel Method of Mechanical Oxidation of CNT for polymer Nanocomposite Application:
Evaluation of Mechanical, Dynamic Mechanical and Rheological Properties
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
International Journal of Chemical Engineering, Volume 2014 (2014), Article ID 623109, 9 pages
- Polyolefin Nanocomposites with Enhanced Photo Stability-Weathering effect on Morphology and
Mechanical Properties
Bishnu P. Panda, Smita Mohanty and Sanjay K.
Nayak
Journal of Materials Engineering and Performance, Vol. 23 (9), 3229-3244, (2014), IF: 1.331
- Improved mechanical and crystallization characteristics of polymer nanocomposites reinforced
with carbon nanotube oxidized via wet mechanochemical method
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
High Performance Polymers, Vol. 26 (7),
760-769, (2014), IF: 1.179
- Evaluation of flame retardancy and shear resistivity characteristics of organoclay within
acrylate polymer
Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K.
Nayak
Journal of Thermal Analysis and Calorimetry, Vol. 118 (1), 405-416, (2014), IF: 1.953
- Influence of thermally induced, dehydroxylated nanoclay on polymer nanocomposites
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
Korean Journal of Chemical Engineering, Vol.
31(8), 1480-1489, (2014), IF: 2.007
- Thermal dehydroxylation of clay as alternative to organic modification: effects on
properties of nanocomposites
P. Pandey, S. Mohanty and Sanjay K. Nayak
Plastics, Rubber and Composites, Vol. 43 (5),
166-176 (2014)
- Improved flame retardancy and thermal stability of polymer/clay nanocomposites, with the
incorporation of multiwalled carbon nanotube as secondary filler: evaluation of hybrid
effect of nanofillers
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
High Performance Polymers, Vol. 26 (7),
826-836, (2014), IF: 1.179
- Hybrid Effect of Nanosilicates and MWNT on Mechanical, Thermal, and Dynamic Mechanical
Properties of Polypropylene
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
Chinese Journal of Engineering, Vol. 2014,
Article ID 270527, 8 pages (2014)
- Hybrid green nanocomposites of poly (lactic acid) reinforced with banana fiber and
nanoclays
V P Sajna, Smita Mohanty and Sanjay K.
Nayak
Journal of Reinforced Plastics & Composites, Vol. 33 (18), 1717-1732, (2014), IF: 1.086
- Tailoring Dispersion and Interaction of MWNT in Polymer Nanocomposites, using Triton X-100
as nonionic surfactant
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
Journal of Materials Engineering and Performance, Vol. 23 (12), 4385-4393, (2014), IF: 1.331
- Mechanical Oxidation of Multiwalled Carbon Nanotubes as A Replacement of Acid Oxidation
Method
Priyanka Pandey, Smita Mohanty and Sanjay K.
Nayak
Nano-Brief Reports and Reviews, Vol. 9 (8),
1450091, (2014).
- Influence of compatibilizer on mechanical, morphological and rheological properties of
PP/ABS blends
Bonda, S, Mohanty, S and Sanjay K. Nayak
Iranian Polymer Journal, Vol. 23 (6), 415
– 425, (2014), IF: 1.422
- Surface characterization of Modified Fly ash for polymer filler applications: A case study
with Polypropylene
Bonda, S, Mohanty, S and Sanjay K. Nayak
Materials Express, Vol. 4 (5), 1 – 9,
(2014), IF: 1.640
- Preparation and performance evaluation of castor oil based polyurethane
prepolymer/polylactide blend,
T. Gurunathan, Smita Mohanty and Sanjay K.
Nayak
J. Material Science, Vol. 49 (23), 8016-8030,
(2014), IF: 2.599
- Compatibilization effect of EVA-g-MAH on mechanical, morphological and rheological
properties of recycled PC/ABS blend
Ramesh V, Manoranjan Biswal, Smita Mohanty and Sanjay K. Nayak
Materials Express, Vol. 4 (6), 499-507(9),
(2014), IF: 1.640
- Effect of Different Solvents in Solvent Casting of Porous PLA scaffolds
Mousam Choudhury, Smita Mohanty and Sanjay K.
Nayak
Biomedical and Tissue Engineering Applications, Vol. 6 (1) (2014)
- Synthesis and Modifications of Epoxy Resins and Their Composites: A Review
N Reddy, Smita Mohanty and Sanjay K. Nayak
Polymer-Plastics Technology and Engineering, Vol. 53 (16), 1723-1758, (2014), IF: 1.232
- Synthesis, characterization and application of Lignin Nanoparticles (LNPs)
Arun Kumar Gupta, Smita Mohanty and Sanjay K.
Nayak
Materials Focus, Vol. 3, 444-454, (2014)
- A model for stress generation, Crack growth and Fracture toughness estimation in TPO based
nanocomposites using Finite element and single edge precracked method
Bishnu P. Panda, Smita Mohanty and Sanjay K.
Nayak
International Journal of Futuristic Trends in Engineering and Technology,
Vol. I, Issue: VIII, 50-60, (2014)
- Organoclay filled amorphous polymer blends: a detailed investigation on flame retardancy and
shear resistivity
Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K.
Nayak
Materials Focus, Vol. 3 (6), 475-484(10),
(2014)
- Influence of surface modified TiO2 nanoparticles on dielectric properties of
PVdF–HFP nanocomposites,
K. Prabakaran, S. Mohanty and Sanjay K.
Nayak
Journal of Materials Science: Materials in Electronics, Vol. 25, 4590-4602, (2014), IF: 2.019
- Influence of surface modified nanoclay on electrochemical properties of PVDF-HFP composite
electrolytes
K. Prabakaran, S. Mohanty and Sanjay K.
Nayak
International Journal of Plastics Technology, Vol.18 (3), 349-361 (2014)
- Poly(alkyl lactate acrylate)s having tunable hydrophilicity
M. Purushothaman, P. Santhana Gopala Krishnan and Sanjay K. Nayak
Journal of Applied Polymer Science, Vol.
131(21), 40962, (2014), IF: 1.600
- Development of biocomposite from recycled polypropylene obtained from end-of-life car
bumper: Evaluation of mechanical, thermal & morphological properties.
Naushad, M., Sanjay K. Nayak
and Mohanty, S.
International Journal of Plastics Technology, Vol. 18 (3), 409-417 (2014)
- Effect of nano-calcium carbonate content on the properties of poly(urethane methacrylate)
nanocomposites
S.D. Maurya, M. Purushothaman, P. Santhana Gopala Krishnan and Sanjay K. Nayak
Journal of Thermoplastic Composite Materials, Vol. 27 (12), 1711-1727, (2014), IF: 1.134
- Sisal fiber reinforced recycled polypropylene (rPP) biocomposite: Characterization of
mechanical, thermal and morphological properties,
Naushad, M., Sanjay K. Nayak
and Mohanty, S.
Material Focus, Vol. 4 (2), 170-178, (2014)
- Effect of Isoalkyl Lactates as Pendant Group on Poly(acrylic acid)
M. Purushothaman, P. Santhana Gopala Krishnan and Sanjay K. Nayak
Journal of Macromolecular Science Part A, Vol.
51(6), 470-480, (2014), IF: 1.020
- Synthesis and characterization of Conducting polymer – Transition Metal Oxide
Composites
G. Dhanu, S. Bhuvaneswari, D.P. Venkat, K. P. Bhuvana, K. Palanivelu and
Sanjay K. Nayak
International Journal of Research in Advent Technology, Vol. 2, (1), 158- 166, (2014)
- Plastic E-waste recycling and management - Scenario – and technologies – A
Review.
S. Sugumar and Sanjay K. Nayak
International Journal of Advanced Information Science and Technology,
Vol. 26 (26), (2014)
- Effect of surface modification of aluminium nitride on electrical and thermal
characterizations of thermosetting polymeric nanocomposites
Mousam Choudhury, Smita Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 34(1), 1–14
(2013), IF: 2.324
- Effect of Functionalized Nanosilica on the Mechanical, Dynamic-Mechanical, and Morphological
Performance of Polycarbonate/Nanosilica Nanocomposites
Manoranjan Biswal, Smita Mohanty, Sanjay K.
Nayak and P. Sudheesh Kumar
Polymer Engineering & Science, Vol. 53(6),
1287–1296 (2013), IF: 1.449
- Nucleation effect of Surface treated TiO2 on PTT (Poly trimethylene terephthalate)
Nanocomposites
Ramesh V, BP Panda, Smita Mohanty and Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol.
127(3), 1909-1920 (2013), IF: 1.600
- Thermal Properties And Cold Crystallization Kinetics Of Surface-Treated Banana Fiber
(BF)-Reinforced Poly(Lactic Acid) (PLA) Nanocomposites
P. J. Jandas, S. Mohanty and Sanjay K.
Nayak
Journal of Thermal Analysis and Calorimetry, Vol. 114(3), 1265-1278 (2013), IF: 1.953
- Surface treated banana fiber reinforced poly (lactic acid) nanocomposites for disposable
applications
P. J. Jandas, S. Mohanty and Sanjay K.
Nayak
Journal of Cleaner Production, Vol. 52,
392-401, (2013), IF: 5.715
- Mechanical Properties Of Eco-Friendly Recycled Polymer Composites: A Comparative Study Of
Theoretical And Experimental Results
Sanjay K. Nayak, Gajendra Dixit and Appukuttan K
K
International Journal of Plastics Technology, Vol. 17(1), 75-93 (2013)
- Proton exchange membranes from sulfonated poly(ether ether ketone) reinforced with silica
nanoparticles,
Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K.
Nayak
High Performance Polymers, Vol. 25(7), 854
– 867, (2013), IF: 1.179
- Rheological and mechanical characterization of renewable resource based high molecular
weight PLA nanocomposites
Jandas P. J., Smita Mohanty and Sanjay K.
Nayak
Journal of Polymers, Volume 2013, Article ID
403467, 11 pages (2013)
- Preparation and characterization of carboxyl-treated multiwalled carbon nanotube-reinforced
shape-memory polyurethane nanocomposites
Mousam Choudhury, Smita Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 28 (8), 1173-1188 (2013), IF: 1.134
- Plasticity/Damage coupling in Fibrillar silicate reinforced PP/EOC composite under strain
controlled loading: Correlation between micromechanical and damage behavior
Bishnu P Panda, Smita Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 28 (9), 1263-1285 (2013), IF: 1.134
- Sustainability, compostability and specific microbial activity on agricultural mulch films
prepared from poly (lactic acid)
P. J. Jandas, S. Mohanty and Sanjay K.
Nayak
ACS Industrial and Engineering Chemistry Research, Vol. 52 (50), 17714–17724, (2013), IF;
2.843
- Mechanical behavior and fracture toughness evaluation of multiphase polymer nanocomposites
using impact and J integral via locus method
Bishnu P. Panda, Smita Mohanty and Sanjay K.
Nayak
Chinese Journal of Engineering, Vol. 2013,
Article ID 245718, 10 pages, (2013).
- Study on the optoelectronic properties of UV luminescent polymer: ZnO nanoparticles
dispersed PANI
J. Kayathri, N. Ranimeyammai, S. Rani, K.P. Bhuvana, K. Palanivelu and
Sanjay K. Nayak
Journal of Materials, Vol. 2013, Article ID
473217, 7 pages (2013)
- Synthesis and Characterization of Polysulfone/clay nanocomposite membranes for fuel cell
application
Lakshmi Unnikrishnan, Smita Mohanty, Sanjay K.
Nayak and Nishant Singh
Journal of Applied Polymer Science, Vol.
124(S1), E309 – E318 (2012), IF: 1.600
- Viscoelastic, mechanical and thermal characterization of fly ash filled ABS composites and
comparison of fly ash surface treatments
Sateesh Bonda, Smita Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 33(1), 22-34 (2012),
IF: 2.324
- Banana fiber reinforced polypropylene nanocomposites: Effect of fiber treatment on
mechanical, thermal and dynamic-mechanical properties.
Manoranjan Biswal, Smita Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 25(6), 765-790 (2012), IF: 1.134
- Investigation of the properties of ferromagnetic ZnO:Cr2O3 nanocomposites
Sanith Jacob, A. V. Santhos Kumar, K. P. Bhuvana, K. Palanivelu and
Sanjay K. Nayak
Material Science in Semiconductor Processing, Vol. 15(3), 326-330 (2012), IF: 2.359
- Biodegradable Nanocomposites of Poly(butylenes adipate-co-terephthalate) (PBAT) and
organically modified layered silicates
Smita Mohanty and Sanjay K. Nayak
Journal of Polymers & Environment, Vol.
20(1), 195-207 (2012), IF: 1.877
- Renewable resource-based biocomposites of various surface treated banana fiber and poly
lactic acid: characterization and biodegradability
Jandas P J, Smita Mohanty and Sanjay K.
Nayak
Journal of Polymers & Environment, Vol.
20(2), 583-595 (2012), IF: 1.877
- Polysulfone/C30B Nanocomposite Membranes for Fuel Cell Applications: Effect of various
Sulfonating Agents
L. Unnikrishnan, Smita Mohanty & Sanjay K.
Nayak and M. Prasad
Polymer - Plastics Technology and Engineering, Vol. 51(6), 568-577 (2012), IF: 1.232
- Fracture study of modified TiO2 reinforced PP/EPDM composite: mechanical behavior and effect
of compatibilization
Bishnu P Panda, Smita Mohanty, Sanjay K.
Nayak and Sushmita Pandit
International Journal of Plastics Technology, Vol. 16(1), 89-100 (2012)
- Preparation and Characterization of Electrically and Thermally Conductive Polymeric
Nanocomposites
Mousam Choudhury, Smita Mohanty, Sanjay K.
Nayak and Rakesh Aphale
Journal of Minerals and Materials Characterization and Engineering,
Vol. 11(7), 744-756 (2012), IF: 1.210
- Mechanical properties of surface treated banana fiber / polylactic acid biocomposites: A
comparative study of theoretical and experimental values
Jandas P J, Smita Mohanty and Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol. 127
(5), 4027–4038, (2012), IF: 1.600
- Modelling of the mechanical properties of polylactic acid / clay nanocomposites using
composite theories
Aswini Kumar Mohapatra, Smita Mohanty and Sanjay K.
Nayak
International Journal of Plastics Technology, Vol. 15(2), 174-187 (2012)
- Synthesis and water state characterization of polysodium acrylate/cellulose microfibril
hydrogels
S Anbudayanidhi, Sanjay K. Nayak and Smita Mohanty
Journal of Thermoplastic Composite Materials, Vol. 27 (5), 573-585 (2012), IF: 1.134
- Dynamic mechanical and thermal properties of polylactide-layered silicate
nanocomposites
A K Mohapatra, S Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 27 (5), 699-716, (2012), IF: 1.134
- Poly lactide / transition metal ion modified montmorillonite nanocomposite - A critical
evaluation of mechanical performance and thermal stability
K.Prakalathan, Smita Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 33(10),
1848–1857 (2012), IF: 1.324
- Flammability & thermal characterization of PMMA/clay nanocomposites and thermal kinetics
analysis
Priyanka Pandey, Anbudayanidhi, Smita Mohanty and Sanjay K. Nayak
Polymer Composites, Vol. 33(11),
2058–2071 (2012), IF: 1.324
- Mechanical, thermal and morphological properties of recycled polycarbonate/ recycled poly
(acrylonitrile-butadiene-styrene) blend nanocomposites
Deeptimayee Mahanta, S Anbu Dayanidhi, Smita Mohanty and Sanjay K. Nayak
Polymer Composites, Vol. 33(12),
2114–2124 (2012),IF: 1.324
- Poly (Lactic Acid) and layered silicate nanocomposites prepared by melt mixing:
thermo-mechanical and morphological properties
Aswini Kumar Mohapatra, S. Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 33(12),
2095–2104 (2012), IF: 1.324
- Effect of modified clay on mechanical and morphological properties of ethylene octane
Copolymer – polypropylene nanocomposites
S K Sharma, Ajay K Nema and Sanjay K.
Nayak
Journal of Composite Materials, Vol. 46(10),
1139–1150 (2012)
- Investigation on the structural and magnetic properties of a polymer composite
polyaniline/Cr3O3
Sanith Jacob, A. V. Santhos Kumar, K. P. Bhuvana, K. Palanivelu and
Sanjay K. Nayak
Polymer – Plastics Technology and Engineering, Vol. 51(3), 317-320 (2012), IF: 1.232
- Studies on Mechanical, Thermal, Physical Properties and Characterization of Nanocomposite of
Nylon-6-ABS blends
A. Patrik Jane Nisha, N Sivapatham, S. Soundarajan, K. Palanivelu and
Sanjay K. Nayak
Journal of Polymer Materials, Vol. 28(1),
37-48 (2012)
- Hydroxy Terminated Polybutadiene : Chemical Modification and Applications
P.S.G. Krishanan, Kavitha Ayyaswamy and Sanjay K.
Nayak
Journal of Macromolecular Science, Vol. 50
(1), 128-138, (2012), IF: 0.963
- Mechanical, Thermal Degradation, and Flammability Studies on Surface Modified Sisal Fiber
Reinforced Recycled Polypropylene Composites
Arun Kumar Gupta, Manoranjan Biswal, S. Mohanty, and Sanjay K. Nayak
Advances in Mechanical Engineering, Vol. 4,
418031, (2012)
- Sisal fiber (SF) reinforced recycled polypropylene (RPP) composites
Sanjay K. Nayak, Gajendra Dixit and Appukuttan K
K
International Journal of Plastics Technology, Vol. 16(2), 150-165 (2012)
- Polylactide/modified layered silicates nanocomposites: A critical analysis of morphological,
mechanical and thermal properties
K Prakalathan, Smita Mohanty and Sanjay K.
Nayak
Journal of Reinforced Plastics and Composites, Vol. 31(19), 1300-1310 (2012), IF: 1.086
- Rheological and Thermomechanical Behaviour of Polylactide / Hexa decyl trimethyl ammonium
Modified Layered Silicate Nanocomposites
K.Prakalathan, S. Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 27 (10), 1303-1320, (2012), IF: 1.134
- Influence of transition metal ion adsorbed montmorillonite on thermal stability, Isothermal
crystallization kinetics and mechanical performance of Polylactic acid nanocomposites
K.Prakalathan, S. Mohanty and Sanjay K.
Nayak
Journal of Thermoplastic Composite Materials, Vol. 27 (12), 1631-1650, (2012), IF: 1.134
- Fabrication of High performance Flyash/Mica/Poly(ether-ether-ketone) Hybrid Composites
M.Rahail Parvaiz, Smita Mohanty, Sanjay K.
Nayak and P.A Mahanwar
International Journal of Polymeric Materials, Vol. 60(1), 75 - 88 (2011), IF: 1.515
- Impact Modification of PTT/PP Blend Nanocomposites: Fabrication and Characterization
Dinesh Upadhyay, Smita Mohanty, Sanjay K.
Nayak, M. Rahail Parvaiz and B P. Panda
Journal of Applied Polymer Science, Vol.
120(2), 932–943 (2011), IF: 1.600
- Effect of Organoclays on nonisothermal crystallization kinetics of Poly (trimethylene
terephthalate) Nanocomposite
S Shukla, Smita Mohanty, Sanjay K. Nayak, and M. Rahail Parvaiz
Polymer-Plastics Technology and Engineering, Vol. 50(4), 386-394 (2011), IF: 1.232
- Effect of surface modification of flyash on mechanical, thermal, electrical and
morphological properties of polyetheretherketone composites
M.Rahail Parvaiz, Smita Mohanty, Sanjay K.
Nayak and P.A.Mahanwar
Materials Science & Engineering A, Vol.
528(13-14), 4277 - 4286 (2011), IF: 3.094
- 86. Poly(L-lactide) / Polyproplene Blends: Evaluation of Mechanical, Thermal and
Morphological Characteristics
Priyanka Choudhary, Smita Mohanty, Sanjay K.
Nayak and Lakshmi Unnikrishnan
Journal of Applied Polymer Science, Vol.
121(6), 3223–3237 (2011), IF: 1.600
- Polypropylene/high impact polystyrene blend nanocomposites obtained from E-waste: evaluation
of mechanical, thermal and morphological properties
Prasanna KMural, Smita Mohanty and Sanjay K.
Nayak
International Journal of Plastics Technology, Vol. 15(1), 46-60 (2011)
- Preparation and characterization of poly (methyl methacrylate)-clay nanocomposites via melt
intercalation: Effect of organoclay on thermal, mechanical and flammability properties
Lakshmi Unnikrishnan, Smita Mohanty, and Sanjay K.
Nayak and Anwar Ali
Materials Science and Engineering A, Vol.
528(12), 3943-3951 (2011), IF: 3.094
- Effect of Surface Modification of Fly Ash reinforced in Polyetheretherketone
Composites
M.Rahail Parvaiz, Smita Mohanty, Sanjay K.
Nayak and P.A. Mahanwar
Polymer Composites, Vol. 32(7),
1115–1124 (2011), IF: 2.324
- Mechanical, Thermal and Dynamic-mechanical Behavior of Banana fiber reinforced polypropylene
nanocomposites.
Manoranjan Biswal, Smita Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 32(8),
1190–1201 (2011), IF: 2.324
- Thermal Stability And Flammability Study of Banana Fiber Reinforced Polypropylene
Nanocomposites.
Manoranjan Biswal, Smita Mohanty and Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol.
125(S2), E432 – E443 (2011), IF: 1.600
- Effect of mercerized banana fiber on the mechanical and morphological characteristics of
organically modified fiber-reinforced polypropylene nanocomposites.
Manoranjan Biswal, Smita Mohanty and Sanjay K.
Nayak
Polymer-Plastics Technology and Engineering, Vol. 50(14), 1458 - 1469 (2011), IF: 1.232
- Effect of surface treatments of banana fiber on mechanical, thermal and biodegradability
properties of PLA/Banana Fiber biocomposites
Jandas PJ, Smita Mohanty and Sanjay K.
Nayak
Polymer Composites, Vol. 32(11), 1689 - 1700
(2011), IF: 2.324
- Polypropylene & potato starch Biocomposites: Physio-mechanical and thermal
properties
S. B. Roy, B. Ramaraj, S. C. Shit and Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol. 120,
3078 – 3086 (2011), IF: 1.600
- Effect of clay loading on flammability of Poly (methyl methacrylate)/ clay
nanocomposites
Priyanka Pandey, Anbu Dayanidhi, Smita Mohanty and Sanjay K. Nayak
Journal of Thermoplastic Composite Material, Vol. 26 (5), 663-679 (2011), IF: 1.134
- Sulphonated Polysulfone / TiO2 Nanocomposites Membranes for Fuel Cell Applications
Lakshmi Unnikrishnan, Smita Mohanty and Sanjay K.
Nayak
International Journal of Plastics Technology, Vol. 15(1), 1-20 (2011)
- Morphological, Mechanical, Thermal, Electrical and Rheological properties of Polycarbonate
composites reinforced with surface modified mica.
M. Rahail Parvaiz, Smita Mohanty, Sanjay K.
Nayak and P.A. Mahanwar
Journal of Minerals & Materials Characterization and Engineering,
Vol. 9(11), 985 – 996 (2010), , IF:
1.21
- Short Bamboo Fibre-reinforced HDPE Composites: Influence of Fibre Content and Modification
on Strength of the composite
Smita Mohanty and Sanjay K. Nayak
Journal of Reinforced Plastics & Composites, Vol. 29(14), 2199 - 2210 (2010), , IF: 1.086
- Sisal Glass Fiber Reinforced PP Hybrid Composites : Effect of MAPP on the Dynamic Mechanical
and Thermal Properties
Sanjay K. Nayak and Smita Mohanty
Journal of Reinforced Plastics & Composites, Vol. 29(10), 1551 - 1567 (2010), IF: 1.086
- Poly(vinyl alcohol) and Layered Double Hydroxide Composites: Thermal and Mechanical
Properties
B.Ramaraj, Sanjay K. Nayak and
Kuk Ro Yoon
Journal of Applied Polymer Science, Vol. 116,
1671 - 1677 (2010), IF: 1.600
- Poly (trimethylene) terephthalate/m-LLDPE blend nanocomoposites: Evaluation of Mechanical,
Thermal and Morphological Behaviour
Sanjay K. Nayak and Smita Mohanty
Materials Science & Engineering A, Vol.
527, 574 - 583 (2010), IF: 3.094
- Aromatic-Aliphatic Poly (butylene adipate-co-terephthalate) Bionanocomposite: Influence of
Organic Modification on Structure and Properties
Smita Mohanty and Sanjay K. Nayak
Polymer Composites, Vol. 31(7), 1194 - 1204
(2010), IF: 2.324
- Polypropylene Nanocomposites Film: A Critical Evaluation on the Effect of Nanoclay on the
Mechanical, Thermal and Morphological Behavior
S K Sharma, Ajay K. Neema and Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol. 115,
3463 - 3473 (2010), IF: 1.600
- Influence of Interfacial Adhesion on the Structural and Mechanical Behaviour of
PP-Banana/Glass Hybrid composites
Sanjay K. Nayak, Smita Mohanty and Sushanta K.
Samal
Polymers Composites, Vol. 31(7),
1247–1257 (2010), , IF: 2.324
- Effect of Organo-modified Layered Silicates on the Properties of Poly-(Methylmethacrylate)
Nanocomposites
Smita Mohanty and Sanjay K. Nayak
Journal of Thermoplastic Composite Materials,
Vol. 23(5), 623-645 (2010), ,IF: 1.134
- Polyether ether ether ketone (PEEK) composites Reinforced with Flyash & Mica
M.R.Rahail Parvaiz, Smita Mohanty, Sanjay K.
Nayak and P.A. Mahanwar
Journal of Minerals & Materials Characterization and Engineering,
Vol. 9(1), 25-41 (2010), IF: 1.210
- Starch based biodegradable PBAT nanocomposites: Effect of starch modification on mechanical,
thermal. Morphological and biodegradability behaviour
Smita Mohanty and Sanjay K. Nayak
International Journal of Plastics Technology, Vol. 13(2), 163 - 185 (2010)
- Biodegradable PBAT/ Starch Nanocomposites
Sanjay K. Nayak
Polymer-Plastics Technology and Engineering, Vol. 49(14), 1406-1418 (2010), IF: 1.232
- Polyethersulfone Membranes: Effect of Sulfonation on Properties
L.Unnikrishnan, Smita Mohanty, Sanjay K.
Nayak and G. Sarkhel
Polymer-Plastics Technology and Engineering, Vol. 49(14), 1419-1427 (2010), IF: 1.232
- Hybridization effect of glass fiber on Mechanical, Morphological and Thermal Properties of
Polypropylene – Bamboo/Glass Fiber Hybrid composites
Sushant K Samal, Smita Mohanty and Sanjay K.
Nayak
Polymers & Polymer Composites, Vol. 18(4),
205 - 218 (2010)
- Polyetheretherketone(PEEK) Composites Reinforced with Surface Modified Mica
M.Rahail Parvaiz, Smita Mohanty, Sanjay K.
Nayak and P.A. Mahanwar
Polymer Composites, Vol. 31(12), 2121 - 2128
(2010), IF: 2.324
- Effect of glycidyl methacrylate (GMA) on the thermal, mechanical and morphological property
of biodegradable PLA/PBAT blend & its Nanocomposites
Mukesh Kumar, Sanjay K. Nayak,
M.Rahail Parvaiz and S. Mohanty
Bioresource Technology, Vol. 101 (21), 8406 -
8415 (2010), IF: 5.651
- Mechanical and Fracture behavior of Banana Fiber reinforced Polylactic Acid
Biocomposites
Sunil K Majhi, Sanjay K. Nayak, Smita Mohanty, Lakshmi Unnikrishnan
International Journal of Plastics Technology, Vol. 14(1), 57-75 (2010)
- Biodegradable Nanocomposites of Poly (butylene adipate-co-terephthalate) (PBAT) with
Organically modified Nanoclays
Smita Mohanty and Sanjay K. Nayak
International Journal of Plastics Technology, Vol. 14(2), 192-212 (2010)
- Mechanical, thermal & Morphological Characterization of Thermoplastic Poly Olefin (TPO)
organically modified clay nanocomposites (Film)
S.K Sharma, Sanjay K. Nayak
and Ajay K.Nema
International Journal of Micro and Nano Electronics, Circuits &
Systems, Vol. 2(1), 25 - 36 (2010)
- Dynamic Mechanical, Rheological & Thermal properties of Intercalated Polystyrene /
Organomontmorillonite Nanocomposites: Effect of Clay Modification on the Mechanical &
Morphological Behaviours
Sanjay K. Nayak and Smita Mohanty
Journal of Applied Polymer Science, Vol.
112(2), 778 -787 (2009), IF: 1.600
- Banana/Glass Fiber-Reinforced Polypropylene Hybrid Composites: Fabrication & Performance
Evaluation
Sushant K Samal, Smita Mohanty and Sanjay K.
Nayak
Polymer-Plastics Technology & Engineering, Vol. 48(4), 397 -414 (2009), IF: 1.232
- Surface modified clay / polypropylene (PP) nanocomposites : Effect on physico –
mechanical, thermal and morphological properties
S K Sharma and Sanjay K. Nayak
Polymer Degradation and Stability, Vol. 94(1),
132 -138 (2009), IF: 3.386
- Polypropylene-Bamboo / Glass Fiber Hybrid Composites: Fabrication & Analysis of
Mechanical, Morphological, Thermal and Dynamic Mechanical Behaviour
Sushant K Samal, Smita Mohanty and Sanjay K.
Nayak
Journal of Reinforced Plastics & Composites, Vol. 28(22), 2729 - 2747 (2009), IF: 1.086
- Influence of Organically Modified Nanoclay on the Performance of Pineapple Leaf Fiber-
Reinforced Polypropylene Nanocomposites
Manoranjan Biswal, Smita Mohanty and Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol.
114(6), 4091 - 4103 (2009), IF: 1.600
- Effect of Clay Types on the Mechanical, Dynamic Mechanical and Morphological Properties of
Polypropylene Nanocomposites
Sanjay K. Nayak, Smita Mohanty and Sushant K
Samal
Polymer-Plastics Technology and Engineering, Vol. 48(9), 976 - 988 (2009), IF: 1.232
- Degradation & flammablity behavior of PP/banana and glass fiber-based hybrid
composites
Sanjay K. Nayak
International Journal of Plastics Technology, Vol. 13(1), 47 - 67 (2009)
- Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological
properties of polypropylene hybrid composites
Sanjay K. Nayak, Smita Mohanty and Sushanta K.
Samal
Materials Science & Engineering A, Vol.
523, 32 - 38 (2009), IF: 3.094
- Optimization of Machining Parameters in machining of GFRP Composites using carbide and PCD
insert
S Vijaykant, S Ilangovan and Sanjay K.
Nayak
International Journal of Engineering Students, Vol. 3(2), 72 (2009)
- Homogeneous esterification of cellulose and characterization of cellulose esters
Kongala Sirisha Devi, V.K. Mathur, Sanjay K.
Nayak, S.Mohanty and Manish Kumar
Scholars Research Library, Per Pharma Chemica, Vol. 1(2), 296 - 303 (2009)
- Polypropylene Nanocomposites: Effect of Organo-modified Layered Silicates on Mechanical,
Thermal & Morphological Performance
Samal K Samal, Sanjay K. Nayak
and Smita Mohanty
Journal of Thermoplastic Composite Materials, Vol. 21(3), 243 -263 (2008), IF: 1.134
- Acrylonitrile-Butadiene-Styrene Nanocomposites Filled With Nanosized Alumina
Kamal K Kar, S Srivastava, Ariful Rahaman and Sanjay
K. Nayak
Polymer Composites, Vol. 29(5), 489 - 499
(2008), IF: 2.324
- Polypropylene (PP) / Ethylene Octene Copolymer (EOC) Blend nanocomposites
Sanjay K. Nayak
International Journal of Plastics Technology, Vol. 12(2), 1047-1072 (2008)
- Effect of Clay Exfoliation and Organic Modification on Morphological, Dynamic Mechanical and
Thermal Behaviour of Melt Compounded Polyamide-6 Nanocomposites
Smita Mohanty and Sanjay K. Nayak
Polymer Composites, Vol. 28(2), 153 - 162
(2007), IF: 2.324
- Linear Low Density Polyethylene/clay Nanocomposites: Influence of MAH-g-PE as Compatibilizer
Loading on the Physico-Mechanical Properties and Crystallization Characteristics
Sangamitra Parija, Sanjay K. Nayak and Satyaban Jena
Polymer-Plastics Technology and Engineering, Vol. 46, 183 - 189 (2007), IF: 1.232
- Mechanical, Thermal and Viscoelastic Behavior of Nylon 6 / Clay Nanocomposites with
Co-treated Montmorillonites
Smita Mohanty and Sanjay K. Nayak
Polymer-Plastics Technology & Engineering, Vol. 46, 367 - 376 (2007), IF: 1.232
- Dynamic and steady state viscoelastic behaviour and morphology of MAPP treated PP / sisal
composites
Smita Mohanty and Sanjay K. Nayak
Materials Science and Engineering A, Vol.
443, 202 - 208 (2007), IF; 3.094
- Rheological Characterization of HDPE / Sisal Fibre Composites
Smita Mohanty and Sanjay K. Nayak
Polymer Engineering and Science, Vol. 47(10),
1634 - 1642 (2007), IF: 1.449
- Melt Blended Polystyrene / Layered Silicate Nanocomposites : Effect of Clay Modification on
the Mechanical, Thermal, Morphological and Viscoelastic Behavior
Smita Mohanty and Sanjay K. Nayak
Journal of Thermoplastic Composite Materials, Vol. 20, 175 - 193 (2007), IF: 1.134
- Dynamic-Mechanical and Thermal Characterization of Polypropylene / Ethylene-Octene Copolymer
Blend
Smita Mohanty and Sanjay K. Nayak
Journal of Applied Polymer Science, Vol. 104,
3137 - 3144 (2007), IF: 1.600
- Fabrication and Characterization of Sisal / Glass and Polypropylene Hybrid Composites
S K Samal, S. Mohanty and Sanjay K. Nayak
Advanced Materials Research IV, Vol.29,
271-274 (2007)
- Thermal, Morphological and Dynamic Mechanical Characterization of Melt blended PC
Nanocomposites
S K Samal, S Mohanty and Sanjay K. Nayak
Advanced Materials Research IV, Vol 29,
275-278 (2007)
- Fabrication and Characterization of Polypropylene / Ethylene-Octene Copolymer Blend
Nanocomposites
S K Samal, Smita Mohanty and Sanjay K.
Nayak
Advanced Materials Research IV, Vol 29,
267-270 (2007)
- Rheological Characterization of Jute/HDPE Composites
S. Mohanty and Sanjay K. Nayak
Advanced Materials Research IV, Vol. 29,
279-282 (2007)
- Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites
Smita Mohanty, Sushil K Verma and Sanjay K.
Nayak
Composites Science and Technology, Vol. 66,
538 - 547 (2006), IF: 4.873
- Rheological Characterization of PP / Jute Composite Melts
Smita Mohanty, Sushil K Verma and Sanjay K.
Nayak
Journal of Applied Polymer Science, Vol.
99(4), 1476 - 1484 (2006), IF: 1.600
- Interfacial, Dynamic Mechanical and Thermal Fiber Reinforced Behaviour of MAPE Treated Sisal
Fiber Reinforced HDPE composites
Smita Mohanty and Sanjay K. Nayak
Journal of Applied Polymer Science, Vol. 102,
3306 - 3315 (2006), IF: 1.600
- Review Article - An Overview on Nanoscopically Modified Polypropylene – Nanoclay
Nanocomposite
S.K. Sharma, Ajay K Nema, Sanjay K. Nayak and Sushil K Verma
International Journal of Plastics Technology, Vol. 10, 624 - 645 (2006)
- Mechanical and Rheological Characterization of Treated Jute-HDPE Composites with a Different
Morphology
Smita Mohanty and Sanjay K. Nayak
Journal of Reinforced Plastics and Composites, Vol. 25(13), 1419 - 1439 (2006), IF: 1.086
- PA6 / Clay Nanocomposites : Effect of Clay Modification on Mechanical, Thermal,
Crystallization and Dynamic Mechanical Behaviour
Smita Mohanty, Sushanta Samal, Yoghesh K. Tripathy, Sanjay K. Nayak, and Sushil K Verma
International Journal of Plastics Technology, Vol. 9, 436 - 450 (2005)
- Cellolosic Fiber Reinforced Thermoplastic Composites - A Review
Smita Mohanty, Sanjay K. Nayak
and Sushil K Verma
International Journal of Plastics Technology, Vol. 9, 507 - 538 (2005)
- Effect of MAPP as Coupling Agent on the Performance of Sisal – PP Composites
S. Mohanty, Sanjay K. Nayak,
S. K. Verma and SS Tripathy
Journal of Reinforced Plastics and Composites, Vol. 23(18), 2047 - 2063 (2004), IF: 1.086
- Viscoelastic Properties of HDPE / Jute Fibre Composites in Molten State
S. Mohanty, Sanjay K. Nayak,
SS Tripathy and Sushil K Verma
International Journal of Plastics Technology, Vol. 8, 223 - 233 (2004)
- Studies on Physico-Mechanical Properties and Thermal Characteristics of Polypropylene/
Layered Silicate Nanocomposites
S Parija, Sanjay K. Nayak, S.
K. Verma and SS Tripathy
Polymer Composites, Vol. 25(6), 646 - 652
(2004), IF: 2.324
- Influence of Fiber Treatment on the Performance of Sisal - Polypropylene Composites
Smita Mohanty, Sushil K Verma, Sanjay K.
Nayak and Sudhansu S. Tripathy
Journal of Applied Polymer Science, Vol. 94,
1336 - 1345 (2004), IF: 1.600
- Effect of MAPP as a Coupling Agent on the Performance of Jute - PP Composites
S Mohanty, Sanjay K. Nayak, S
K Verma and SS Tripathy
Journal of Reinforced Plastics and Composites, Vol. 23(6), 625 - 637 (2004), IF: 1.086
- Studies on mechanical performance of bio fibre/glass reinforced polyester hybrid
composites
S Mishra, A K Mohanty, L.T. Drzal, M Misra, S. Parija, Sanjay K. Nayak and SS Tripathy
Composites Science & Technology, Vol. 63,
1377 - 1385 (2003), IF: 4.873
- SEM Observation of the Fractured Surfaces of Coir Composites
J. Rout, M Mishra, A K Mohanty, Sanjay K.
Nayak and SS Tripathy
Journal of Reinforced Plastics and Composites, Vol. 22(12), 1083 - 1100 (2003), IF: 1.086
- Effect of Surface Treatment on the Interface of HDPE – Jute Fiber Composites
S. Mohanty, Sushil K Verma, Sanjay K. Nayak and SS Tripathy
International Journal of Plastics Technology, Vol. 7, 75 - 87 (2003)
- Surface Modification of Coir Fibres. II. Cu(II) - IO4 Initiated Graft Co- polymerisation of
Acrylonitrile onto Chemically Modified Coir Fibres
J Rout, M Misra, SS Tripathy, Sanjay K.
Nayak and A K Mohanty
Journal of Applied Polymer Science, Vol. 84,
75 - 82 (2002), IF: 1.600
- Novel Eco-Friendly Biocomposites: Biofiber Reinforced Biodegradable Polyester Amide
Composites – Fabrication and Properties Evaluation
S Mishra and SS Tripathy, M Misra and A K Mohanty and Sanjay K. Nayak
Journal of Reinforced Plastics and Composites, Vol. 21(1) 55 -70 (2002), IF: 1.086
- The Influence of Chemical Surface Modification on the Performance of Sisal-Polyester
Bio-composites
S Mishra, M Misra, SS Tripathy, Sanjay K.
Nayak and A K Mohanty
Polymer Composites, Vol. 23(2), 164 - 170
(2002), IF: 2.324
- Potentiality of Coir Fibers as Reinforcement in Polypropylene Composites: Effect of Fiber
Loading and Coupling Agents
J. Rout, M Mishra, Sanjay K. Nayak, SS Tripathy, A K Mohanty & Sushil K. Verma
International Journal of Plastics Technology, Vol. 5, 55 - 64 (2002)
- Potentiality of Pineapple Leaf Fibre as Reinforcement in PALF-Polyester Composite : Surface
Modification and Mechanical Performance
S Mishra, M Misra, SS Tripathy Sanjay K.
Nayak and A K Mohanty
Journal of Reinforced Plastics and Composites, Vol. 20(4), 321 - 334 (2001), IF: 1.086
- The Influence of Fiber Surface Modification on the Mechanical Properties of Coir-Polyester
Composites
J Rout, M Misra, SS Tripathy, Sanjay K.
Nayak and A K Mohanty
Polymer Composites, Vol. 22(4), 468 - 476
(2001), IF: 2.324
- The influence of fiber treatment on the performance of coir-polyester composites
J Rout, M Misra, SS Tripathy, Sanjay K.
Nayak and A K Mohanty
Composites Science & Technology, Vol. 61,
1303 - 1310 (2001), IF: 4.873
- Studies on Synthesis, Characterization and Adhesive Strength Evaluation of KFA Substituted
Resole Adhesives
S. Parija, A K Mohanty, M Misra, Sanjay K.
Nayak and SS Tripathy
Polymers for Advanced Technologies, Vol. 12,
407 - 414 (2001), IF: 1.907
- Scanning Electron Microscopy Study of Chemically Modified Coir Fibres
J Rout, SS Tripathy, Sanjay K. Nayak, M Misra and A K Mohanty
Journal of Applied Polymer Science, Vol. 79,
1169 - 1177 (2001), IF: 1.600
- Graft Copolymerization of Acrylonitrile on Chemically Modified Sisal Fibers
S Mishra, M Misra, SS Tripathy, Sanjay K.
Nayak and A K Mohanty
Macromolecular Materials and Engineering, Vol.
286, 107-113 (2001), IF: 2.420
- Novel Eco-Friendly Biodegradable Coir-Polyester Amide Bio-composites: Fabrication and
Properties Evaluation
J Rout, M Mishra, SS Tripathy, Sanjay K.
Nayak and A K Mohanty
Polymer Composites, Vol. 22(6), 770 - 778
(2001), IF: 2.324
- Novel, Low-Cost Jute-Polyester Composite II. SEM Observation of the Fractured Surfaces
B. N. Dash, A. K. Rana, S. C. Mishra, H. K. Mishra, Sanjay K. Nayak and S. S. Tripathy
Polymer-Plastics Technology & Engineering, Vol. 39(2), 333 - 350 (2000), IF: 1.232
- Novel, Low-Cost Jute-Polyester Composites. III. Weathering and Thermal Behaviour
B. N. Dash, A. K. Rana, H. K. Mishra, Sanjay K.
Nayak and S. S. Tripathy
Journal of Applied Polymer Science, Vol. 78,
1671 - 1679 (2000), IF: 1.600
- Coir-Polyester Composite: Effect of Fibre Surface Treatment on Mechanical Properties of
Composite
S K. Nayak, SS Tripathy, J Rout and A K
Mohanty
International Plastics Engineering and Technology, Vol. 4, 79-86 (2000)
- Evaluation of physico-mechanical properties of biodegradable kendu gum dust filled
polyolefin blends
S Parija, A K Mohanty, M Misra and Sanjay K.
Nayak
Polymer Degradation and Stability, Vol. 67, 7
- 12 (2000), IF: 3.386
- Studies on Effective Bond Strength of Kendu Fruit Adhesive
S. Parija, M Misra, A K Mohanty and Sanjay K.
Nayak
Polymer-Plastics Technology & Engineering, Vol. 38(5), 1107 - 1119 (1999), IF: 1.232
- Novel, Low-Cost Jute-Polyester Composites. Part 1: Processing, Mechanical Properties, and
SEM Analysis
B. N. Dash, A. K. Rana , H. K. Mishra, Sanjay K.
Nayak, S. C. Mishra and S. S. Tripathy
Polymer Composites, Vol. 20(1), 62- 71 (1999),
IF: 2.324
- Photopolymerization Initiated by Charge-Transfer Complex. X. Photopolymerization of Methyl
Methacrylate with the use of Isoquinoline-Sulphur Dioxide Charge Transfer Complex
Subasini Lenka, Padma L. Nayak and Sanjay K.
Nayak
Journal of Polymer Science, Part A: Polymer Chemistry, Vol. 25, 703 - 709 (1987), IF: 3.113
- Photopolymerization Initiated by Charge-transfer Complex: VIII - Effect of Solvent
Subasini Lenka, Padma L. Nayak and Sanjay K.
Nayak
Polymer Photochemistry, Vol. 6(1), 31 - 40
(1985)
- Photopolymerization Initiated by Charge-Transfer Complex : IX Photopolymerization of Methyl
Methacrylate Initiated by α - Picoline-Sulphur Dioxide Charge-Transfer complex: Effect
of Solvent
Padma L. Nayak, Subasini Lenka and Sanjay K.
Nayak
Polymer Photochemistry, Vol. 6, 163 - 173
(1985),IF: 4.23
- Unperturbed Dimension of Polymer Molecules from Viscosity Measurements in Mixed Solvents.
II
Subasini Lenka, Padma L. Nayak and Sanjay K.
Nayak
Journal of Macromolecular Science - Chem, A, Vol. 21(1), 57 - 68 (1984), IF: 0.963
- Photopolymerization Initiated by Charge-Transfer Complex. VI. Photopolymerization of Methyl
Methacrylate with the Use of Isoquinoline-Chlorine Charge – Transfer Complex
Subasini Lenka, Padma L. Nayak and Sanjay K.
Nayak
Journal of Polymer Science, Polymer Chemistry Edition, Vol. 22, 429 - 435 (1984)IF: 2.591
- Photopolymerization Initiated by Charge-Transfer Complex. VII. Photopolymerization of Methyl
Methacrylate with the Use of α – Picoline Chlorine Charge - Transfer
Complex
Subasini Lenka, Padma L. Nayak and Sanjay K.
Nayak
Journal of Macromolecular Science - Chem, A, Vol. 20(8), 835 - 845 (1983), IF: 0.963
